User's Manual

English · 
01
Getting Started
Getting to know your Monitoring system
Wireless Receiver
After opening the box, fully charge the monitor before use. After initial charge, recharge as needed.
Front & Back Controls
Navigation Controls / Button
Viewing Mode: The following controls are used while watching live video from the camera:
Press the [+] or [–] keys to increase or decrease the volume.
Press the [A] key to view cameras in automatic switching mode.
Press the [M] key to manually switch between cameras.
M
enu Mode: Use the [+/–/A/M] key arrows to navigate in Menu Mode.
Press the [
] button to confirm the menu selection.
You must have more than one camera configured on the system when using the functions that requires more than one camera.

•
•
•
n
`
Receiver Antenna
Receives and sends signals from or to the camera.
2.5” LCD Screen
Displays video from the camera.
Speaker
Produces the sound transmitted from the camera(s).
Belt hanger
When you carry the receiver, use the belt hanger to
hold the receiver onto your belt.
MENU Button
Press to access the receiver menu.
Press the button again to exit.
Stand lever
Use to hold the receiver onto a table.
Microphone
Transmits audio to the camera when Talk Button is
pressed down and held like a walkietalkie.
SEW-3020
Play/Stop
Used to play or stop playing the recorded data.
Navigation Controls/
Button
Use the controls to move and select while in Viewing
Mode and Menu Mode.
SLEEP /
Button
Used to activate the screen saver mode.
Press the [A/M] or [S
LEEP] button again to release the
screen saver mode.
Used to delete the recorded data
on the Micro SD card in search mode.