FCC TEST REPORT Report No.: EMC-FCC-R0071 http://www.emc2000.co.kr Appendix 6. User manual EMC compliance Ltd. Page: 1 of 1 480-5 Shin-dong, Yeongtong-gu, Suwon-city, Gyunggi-do, 443-390, Korea 82 31 336 9919 (Main) 82 31 336 4767 (Fax) This test report shall not be reproduced except in full, Without the written approval.
BabyVIEW User Manual If you have additional questions or need further assistance, contact Samsung support at (877) 349-3149. To extend your one year warranty by three months, be sure to go to www.samsungsv.com and register your product.
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 3. Heed all warnings. 2. 4. 5. 6. 7. BabyVIEW User Manual Copyright ©2012 Samsung Techwin Co., Ltd. All rights reserved. Trademark is the registered logo of Samsung Techwin Co., Ltd. The name of this product is the registered trademark of Samsung Techwin Co., Ltd. Other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Samsung Techwin Co.
SPECIFY SERVICE INSTRUCTIONS AND WARRANTY TERMS FCC Caution : Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Contents What’s Included Package Contents…………………………………………………… 5 Getting Started Functional Description………………………………………………… 6 Powering your monitor………………………………………………………… 6 Operating the System………………………………………………………… 6 Viewing Mode Display Indicator Description………………………………………………… 8 How to use the indicator……………………………………………………… 8 Menu Operation……………………………………………………… 8 How to use the setup buttons………………………………………………… 8 How to use the setup icon…………………………………………………… 9 Overview Getting to know your Monitoring
01 What’s Included What’s Included Package Contents The system comes with the following components: SEW-3036W SEW-3036W Wireless camera Wireless monitor User Manual & Warranty Card Camera Adapter Monitor Adapter Screws (2EA) & Plastic anchors (2EA) Check your package to confirm that you have received the complete system, including all components shown above.
Getting Started Functional Description After opening the box, fully charge the monitor before use. After initial charge, recharge as needed. - ON - OFF DC IN 6V Wireless Camera The Wireless Camera is supposed to be supplied with power at all times. Wireless Monitor You can use the device while charging with connected adapter, and the device is portable if charged. nn `` Check if the Power LEDs of wireless camera and wireless monitor are turned on.
Voice activated (VOX) Zoom • H(High) : Sets to higher sensitivity. • L(Low) : Sets to lower sensitivity. Sound level Press the [ ] button on the monitor to zoom in on the current screen. Press the button again to zoom back out. SEW-3036W Press the [SLEEP] button to turn off the screen and save battery power. Your monitor will continue to detect sound around the camera. Press any button to turn the screen on again.
Viewing Mode Display e Digital Clock Displays the time that is set on the monitor. It only provides AM / PM time format and no 24hour format. Indicator Description f Monitor Speaker Mute Indicates the monitor speaker is muted. Once the monitor’s speaker is muted, no sound from the camera is produced. How to use the indicator a b cd g VOX On e Indicates the Power / VOX slide switch position is set at “VOX” mode. fg h i h Battery Capacity Level Indicates how much battery capacity left.
1. Press [MENU] button to enter the menu setting or exit the menu setting. 2. Move to other menu by press [_] or [+] button. 3. Adjust option level by [$] or [%] button. 4. Press [ nn `` ] button to save and complete. If no action more than 20sec, it will be time out back to monitor mode with save. e Camera Select/Scan Mode Set which camera is being currently viewed.
Overview Getting to know your Monitoring system Wireless Monitor After opening the box, fully charge the monitor before use. After initial charge, recharge as needed. Front Controls Monitor Antenna MENU Button Press to access from video monitor mode to menu mode operation. In menu mode, press this button will go back to monitor mode with save from selection. Receives and sends signals from or to the camera. 3.5” LCD Screen Displays video from the camera.
Back Controls TALK Button Belt Clip Press down and hold the button to talk back to the camera currently being displayed on the LCD screen. When you carry the monitor, use the belt hanger to hold the monitor onto your belt. Kick Stand Speaker Produces the sound transmitted from the camera(s). Use to hold the monitor onto a table. - ON - VOX - OFF DC IN 6V 04 nn `` You must have more than one camera configured on the system when using the functions that requires more than one camera.
Wireless Camera Front & Back Controls IR LEDs Camera Antenna Infrared LED’s provide viewing in no / low light conditions. Microphone Receives sounds for the area near the camera, and transmits sound from the camera to the monitor. Sends & receives signals to or from the monitor. - ON - OFF DC 6V Power Input - ON - OFF DC IN 6V DC IN 6V Connect the adapter to the camera. Speaker Produces the sound transmitted from the monitor.
Installation How to Install 1. 2. CAUTION: If you use the system to watch a young child, do not place the camera in the child's reach. Wireless Monitor 1. Place the monitor in a place that will have clear reception with your camera(s). 2. Pull out the stand. `` `` Use the drilling template to drill holes on the wall for camera installation. (Page 17) The camera can also be placed on a flat surface, such as a table or shelf, and no mounting hardware is required.
Appendix Specifications Item System General Operating Frequency Range 2400 MHz~2483.5 MHz Monitor Sensitivity -88dBm Transmitting Power Type of Spread Spectrum TX Type of Modulation Data Rate Transmission range Weight Details Item Wireless Camera Details Regulation Compliance FCC/CE RoHS Compliance Yes for CE version only Other Special Feature Built in Microphone/ Speaker Display Type/Size Color TFT 3.
Troubleshooting Problem Solution No picture from a camera 1. 2. 3. 4. 5. The picture is or has become choppy The picture may become choppy when experiencing a lower frame rate (i.e. 10 frames per second vs. a higher 20 frames per second). No sounds (even with both units turned on) 1. Make sure that the power adapter is connected to the camera. 2. The battery on the monitor may be dead, be sure to charge it using the adapter included. 3.
Samsung Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products. The Eco mark represents Samsung Techwin’s devotion to creating environmentally friendly products, and indicates that the product satisfies the EU RoHS Directive. Correct disposal of batteries in this product (Applicable in the European Union and other European countries with separate battery return systems.
50mm [2 inch] TEMPLATE This template is used to install the camera on the wall.
SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Toll Free : 1-877-349-3149 www.samsungsv.com SAMSUNG TECHWIN EUROPE LTD.