BrightVIEW User Manual English
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 3. Heed all warnings. 2. 4. 5. 6. 7. 8. 9. BrightVIEW Keep these instructions. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
SPECIFY SERVICE INSTRUCTIONS AND WARRANTY TERMS FCC Caution : Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Contents What’s Included Package Contents…………………………………………………… 5 Getting Started Functional Description………………………………………………… 6 Powering your monitor………………………………………………………… 6 Operating the System………………………………………………………… 6 Viewing Mode Display Indicator Description………………………………………………… 8 How to use the indicator……………………………………………………… 8 Menu Operation……………………………………………………… 9 How to use the function tools………………………………………………… 9 How to use the setup icon…………………………………………………… 9 Overview Getting to know your Monitori
01 What’s Included What’s Included Package Contents The system comes with the following components: Wireless camera Wireless monitor User Manual & Warranty Card Camera Adapter Monitor Adapter Plastic anchor (1EA) & Screw (1EA) Check your package to confirm that you have received the complete system, including all components shown above.
Getting Started Functional Description Powering your monitor After opening the box, fully charge the monitor before use. After initial charge, recharge as needed. Operating the System The basic operation is as follows: Pairing The units already come paired for your convenience. This button is used to add an additional camera. User can select camera number to assign. Up to 4 Cameras may be paired. 1. 2.
Voice activated (VOX) • Low Sound Level Detection : Sets to higher sensitivity. • High Sound Level Detection : Sets to lower sensitivity. Two-way talk Press the [ ] button while talking. Getting Started Press [ / ] switch the split mode. According to the paired camera, screen split mode is different. When two cameras are paired, it displays as 2-split mode. When there are more than 2 cameras are paired, it displays as 4 split mode. Up to 4 cameras can be paired.