Manual

Storage
You can activate recording on your device, set the recording conditions, check the saved
data capacity and format the device itself.
1. From the Setup menu, select the
<Event (
)> tab.
2. Click <Storage>.
3. Select a device to save data in.
M
`
If your device is properly recording data, it
will display “Recording”.
`
If you see an “Error” message, check the
following:
-
Check the storage to see if it is
connected to the device.
-
Check the files in the storage to see if
they are damaged.
-
Check the storage to see if they are
physically damaged.
`
If the “Error” message does not disappear after following the instructions, format the Micro SD
card.
After formatting, if the error message still remains, replace the Micro SD card.
`
If you remove the Micro SD card without changing a button to ‘off’ position in settings or if you
connect a camera to an unstable power source, the Micro SD card may be damaged.
setup screen
86_ setup screen