Digital Color Camera User Manual SNC-79440BWN CAUTION : Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE : This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
User Manual Copyright ©2017 Hanwha Techwin Co., Ltd. All rights reserved. Trademark Each of trademarks herein is registered. The name of this product and other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Copyright of this document is reserved. Under no circumstances, this document shall be reproduced, distributed or changed, partially or wholly, without formal authorization.
part names and functions Equipped with the IR LED lights and the illumination sensor, the camera enables you to monitor at all times, day and night. The camera is suitable for both indoor and ourtdoor use. Do not fully expose the camera to rain. The camera must be installed under a shelter to avoid exposure to excessive rain or moisture. a b c d a b c d e Lens Name IR LED Illumination Sensor Pairing Button Power Cable e Description 3.
precautions Ensure you read out the following instructions before installing the camera: • Select an area (ceiling or wall) that can withstand 5 times the camera weight • Stuck-in or peeled-off cables can cause damage to the product or a fire. • For safety purposes, keep anyone else away from the installation site. And put aside personal belongings from the site, just in case.
Protection of Cable from Water If this product is mounted outdoor, water leakage may occur at gap between cables. As shown below, butyl rubber (available on the market) shall be used to protect from water. 1. Connect power supply and BNC power source. 2. Cover black sheath of the cable (Zone A), and ensure half of butyl rubber can cover the cable joint. JJ `` Poor water protection at the cable sheath may cause water leakage. Make sure to wrap tightly.
Specifications CAMERA MODEL: SNC-79440BWn Video Item Details Imaging Device 2M CMOS (1/2.9") Effective Pixels 1,920(H)x1,080(v) Scanning System Progressive Synchronization Internal Horizontal Resolution 1080P Min. Illumination 0 Lux (IR LED ON) Camera Output RJ45 Focal Length 3.6mm Max. Aperture Ratio F2.
Electrical Item Details Input Voltage 12V/500mA DC Adaptor Power Consumption 5.4W(IR LEDS ON) Color / Material White / Metal Dimension (Ø x D) Ø69.3 x D147.2mm (2.73" x 5.79") Weight 0.34kg prox. Mechanical / Package information Accessory Printed material Quick guide Bracket one body (assembled) Screw 3 EA (per camera) Anchor 3 EA (per camera) Hex key 1 EA (per camera) Power Adaptor 12V 0.
Dimension CAMERA Unit: mm (inch) 117.3 (4.62") .30 Ø69 ") 3 (2.7 77.6 (3.06") Ø69.30 (2.73") 87.47 (3.44") 117.3 (4.62") Ø6 (0.24") Ø54.2 (2 .13") 3-Ø3.60 (0.12"-0 .14") 134.5 (5.30") 147.2 (5.
FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Industry Canada Statement This device complies with RSS-247 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-247 d’Industrie Canada applicable aux appareils radio exempts de licence.
Hanwha Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products. The Eco mark represents Hanwha Techwin's devotion to creating environmentally friendly products, and indicates that the product satisfies the EU RoHS Directive.
Head Office 6, Pangyo-ro 319 beon-gil, Bundang-gu, Seongnam-si, Gyeonggi-do, 463-400 Rep. of KOREA Tel : +82.70.7147.8753 Fax : +82.31.8018.3740 www.hanwha-security.com Hanwha Techwin America 500 Frank W. Burr Blvd. Suite 43 Teaneck, NJ 07666 Toll Free +1.877.213.1222 Direct +1.201.325.6920 Fax +1.201.373.0124 www.hanwha-security.com Hanwha Techwin Europe Heriot House, Heriot Road, Chertsey, Surrey, KT16 9DT, United Kingdom Tel +44.1932.57.8100 Fax +44.1932.57.8101 www.hanwha-security.
