080p Wireless IR Camera User Manual SNC-79447BW
5M AHD Analog Bullet Camera User Manual Copyright ©2019 Hanwha Techwin Co., Ltd. All rights reserved. Trademark Each of trademarks herein is registered. The name of this product and other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Copyright of this document is reserved. Under no circumstances, this document shall be reproduced, distributed or changed, partially or wholly, without formal authorization.
overview IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 3. Heed all warnings. 2. 5. 6. Follow all instructions. Do not use this apparatus near water. Clean the contaminated area on the product surface with a soft, dry cloth or a damp cloth. (Do not use a detergent or cosmetic products that contain alcohol, solvents or surfactants or oil constituents as they may deform or cause damage to the product.) 7.
overview SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.
CAUTION 1. 3. 4. 5. 6. 7. 8. 9. Do not install in a location subject to high temperature, low temperature, or high humidity. Doing so may cause fire or electric shock. If you want to relocate the already installed product, be sure to turn off the power and then move or reinstall it. Remove the power plug from the outlet when then there is a lightning. Neglecting to do so may cause fire or damage to the product. Keep out of direct sunlight and heat radiation sources. It may cause fire.
overview CONTENTS OVERVIEW 3 4 6 7 Important Safety Instructions Safety Precautions Contents Part Names and Functions INSTALLATION 8 8 9 9 Precautions Installing the camera Protection of Cable from Water Connecting the NVR 10 11 Product Specification Product Overview 3 8 APPENDIX 10 6_ overview
PART NAMES AND FUNCTIONS Equipped with the IR LED lights and the illumination sensor, the camera enables you to monitor at all times, day and night. The camera is suitable for both indoor and ourtdoor use. a b c d a b c d e Name White-Light Illuminator Lens Illumination Sensor Pairing Button Power Cable e Description 야간에 더욱 선명한 이미지를 얻기 위해 사용합니다. 4mm focal length enables you to monitor at a wider field of view Detects incoming light to control the IR LED. Click to do pairing manually.
installation PRECAUTIONS Ensure you read out the following instructions before installing the camera: •• Select an area (ceiling or wall) that can withstand 5 times the camera weight •• Stuck-in or peeled-off cables can cause damage to the product or a fire. •• For safety purposes, keep anyone else away from the installation site. And put aside personal belongings from the site, just in case.
PROTECTION OF CABLE FROM WATER If this product is mounted outdoor, water leakage may occur at gap between cables. As shown below, butyl rubber (available on the market) shall be used to protect from water. 2. Cover black sheath of the cable (Zone A), and ensure half of butyl rubber can cover the cable joint. JJ `` Poor water protection at the cable sheath may cause water leakage. Make sure to wrap tightly. `` The water-proof butyl rubber is made of rubber that expands to twice the original length.
appendix PRODUCT SPECIFICATION Video Item Imaging Device 2M CMOS Effective Pixels 1920x1080p (2MP) Sensor SP2309 Scanning System Progressive Horizontal Resolution 1080P Min. Illumination 0 Lux (IR LED ON) Camera Output Wireless transmission Lens Focal Length 4 mm Angular Field of View D : 105° Max. Aperture Ratio F2.
PRODUCT OVERVIEW 1 ° 80 67.5 (2.66˝) 124.6 (4.9˝) 133.6 (5.
Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC / Industry Canada RF Exposure Statement -For 195 This device must not be co-located or operation in conjunction with any other antenna or transmitter except complying with IC multi-transmitter requirements. -For camera This equipment complies with FCC / IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
Head Office 6, Pangyo-ro 319 beon-gil, Bundang-gu, Seongnam-si, Gyeonggi-do, 463-400 Rep. of KOREA Tel : +82.1588.5772 Fax : +82.31.8018.3740 www.wisenetlife.com Hanwha Techwin America 500 Frank W. Burr Blvd. Suite 43 Teaneck, NJ 07666 Tel +1.844 WISENET (844.947.3638) E-mail : cs@wisenetlife.com www.wisenetlife.com Hanwha Techwin Europe Heriot House, Heriot Road, Chertsey, Surrey, KT16 9DT, United Kingdom Tel : 00800.8010.8022 / +31.(0)13.5792.790 www.hanwha-security.
