Manual

network configuration
30_
network configuration
Accessing the network camera connected to the local network.
Since using the IP Installer on a remote computer that is not in the Broadband Router’s network cluster is not
allowed, users can access cameras within a Broadband Router’s network by using the camera’s DDNS URL.
1. Before you can access a camera in the Broadband Router network, you should have set the port range
forward for the Broadband Router.
2. Launch an Internet browser on an external remote monitoring PC.
3. Type a DDNS URL address (http://www.samsungipolis.com/Product ID) in the address bar to connect to
the camera.
4. Enter the <User name> and <Password> to login when the login window appears.
Login
When connecting to a camera through the web browser, the login window on the left appears.
Type the name and password of the user to connect to the camera.
1. Enter “admin” in the <User Name> input box.
The administrator ID, “admin”, is fixed and can not be
changed.
2. Enter “4321” in the <Password> input box.
3. Click [OK].
If you have logged in successfully, you will the Live Viewer
screen.
M
 The default user ID is “admin”, and the default password is
“4321”.
 For security purposes, ensure that you change the password in
<System> - <User>.
 The default password can be exposed to a hacking thread so it
is recommended to change the password after installing the
product.
Note that the security and other related issues caused by the unchanged password shall be responsible for the user.