CE TEST REPORT Report No.: EMC-FCC-R0065 http://www.emc2000.co.kr Appendix 6. User manual EMC compliance Ltd. 480-5 SHIN-DONG, YEONGTONG-GU, SUWON-CITY, GYEONGGI-DO, KOREA 443-390 82 31 336 9919 (Main) 0505 299 8311 (Fax) This test report shall not be reproduced except in full, Without the written approval.
SAMSUNG SMARTCAM User Manual SNH-1011N
SPECIFY SERVICE INSTRUCTIONS AND WARRANTY TERMS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.
• Make sure to use the power adaptor provided. If used with unidentified adaptor, it may damage the product. The power adaptor must be used with regular household electric supply. • Avoid sharp, pointed objects around the adaptor’s cable, not to damage the cable. • Be warned and never hold the cable’s stripped part when connecting / disconnecting the adaptor to/from the wall outlet. • To avoid entangled cable lines, avoid using cable extension for adaptor’s power cord.
01 Getting Started Features What’s Included Getting to know your Monitoring system Power Supply Network connection 4 5 6 7 7 Features • Easy to install -- With the help of WPS (Wi-Fi Protected Setup), wireless sharing and easy connection are enabled. -- Simply visit the home page (www.samsungsmartcam.com) and download and install the program without a separate installer program.
What’s Included The system comes with the following components: Power Adaptor Quick Guide Warranty Card Bracket wall Tape wall hanging Network Cable Getting Started Camera & Bracket body 01 Check for above components when opening the product package.
Getting to know your Monitoring system DC 5V Power Input Built-in IR LEDs for night vision Press to access the receiver menu. Press the button again to exit. DC IN 5V Used if WPS is not supported on the Wireless Access Point or if you do not have a Wireless Access Point High quality camera lens NETWORK Power / Wi-Fi status LED Built-in Mic Network port SAMSUNG SMARTCAM Built-in speaker 스마트폰에서 전달되는 음성을 출력합니다.
Power Supply Network connection Plug-in the camera power adapter to the wall outlet and connect the camera as shown. It will take about 1min for the camera to boot-up completely. When the boot-up is complete, the power LED color will change from red to blue. 01 자세한 네트워크 설정 방법은 "Network Connection and Settings"을 참고하세요. (10쪽) LED status Getting Started LED 색상은 동작 상태에 따라 달라집니다. 다음 표를 참고하세요.
02 Installation & Network Connection Installation Precautions Wall mounting Stand mounting Network Connection and Settings 8 8 9 10 11 Precautions 11 If using a cable router 12 If using a Wireless Access Point not equipping WPS 12 To connect to a wireless network with WPS 13 8 · English Installation Precautions 1. Install the camera in a place where it can receive the video signal with no interference. 2. Keep it away from humidity such as around the humidifier. 3.
Wall mounting 4. Adaptor 플러그 부분이 12시 nn `` 방향을 향하도록 하세요. 조립하기 1. Zipper bag에서 Tape wall hanging 및 Bracket wall을 꺼내세요. 2. Tape wall hanging의 사각형 바닥면 필름을 제거한 후, Bracket wall의 바닥면에 위치를 맞춰 부착하세요. Tape wall hanging의 손잡이를 잡고 이형지를 제거한 후, 부착하고자 하는 면의 [▲ Top] 표시가 12시 방향을 향하게 하여 부착하세요. nn `` `` The Tape wall hanging cannot be reused after being used once. 부착면에 먼지 / 물기 / 기름기를 사전에 닦아낸 후 부착해야 접착력이 좋습니다. TOP 02 TOP 5. Bracket body의 두 개의 홈에 맞춰 선을 정리하세요.
7. 분리하기 Adaptor의 플러그와 카메라 뒷면의 전원 단자와 연결하세요 DC IN 5V done, remove the protective film from nn `` When the lens. NETWORK 1. 카메라 뒷면의 전원 단자에서 Adaptor의 플러그를 빼세요. 2. Bracket body의 왼쪽에 있는 [PUSHI TO RELEASE] 를 누른 상태에서 시계 반대방향으로 돌리면, Bracket wall이 분리됩니다. AM G SMARTC SAMSUN TO RELEASE] 를 누르지 않고 Bracket body를 시계 nn `` [PUSHI 반대방향으로 돌려도 됩니다. UNLOCK ◀ 8. ▶ LOCK Adjust the camera’s shooting angle as appropriate. nn `` UNLOCK ◀ ▶LOCK Do not put excessive force.
2. Bracket wall의 홈을 이용하여 시계 방향으로 ‘딸깍’ 소리가 들릴 때까지 회전시키세요. 3. 분리 시, Bracket body 측면의 [PUSHI TO RELEASE] 를 누른 상태에서 홈을 이용하여 시계 반대방향으로 회전시키세요. nn `` 조립 및 분리 시, 손톱이 부러지지 않도록 주의하세요. Adaptor의 플러그와 카메라 뒷면의 전원 단자와 연결하세요. DC IN 5V OCK ◀ ▶ LOC K SAM Precautions • The wireless network access may fail, depending on the communications environment. • For details about the network settings and password, contact your network administrator or service provider.
If using a cable router If using a Wireless Access Point not equipping WPS If you do not have a Wireless Access Point, you must connect the camera using LAN cable directly to your home router. Connect the network cable to the camera and to the home router as shown below . Please refer to on page 24. 1. DC IN 5V NETWORK SAMSUNG SMARTCAM If you want to connect the camera using a non-WPS Wireless Access Point, change the network setting to Wire and try the wireless network.
the Wireless Access Point do not support WPS or you do not have wirelss router, nn `` Ifplease go to Wired Connection. To connect to a wireless network with WPS `` What is WPS? WPS enables to make connection between the camera and the Wireless Access Point with a simple click of the button. 1. When you apply the power, the power status LED is lit red, and it will change to red blinking when the booting is completed. 2. Press the WPS button on the camera.
Monitoring Settings 03 Account Setup and Registering the Camera Live Video Alarm Settings Live Video Setup Video Setting Network Setting Time Setting Admin Private Key Update Firmware My Account 14 · English 14 14 20 21 24 24 25 26 26 26 27 27 Settings Account Setup and Registering the Camera Once you register the product with the site, you can monitor the camera video on the PC or laptop computer.
1. Enter www.samsungsmartcam.com on the web browser’s address field. Java-uninstalled PC 1) Verify the Java version • In the SmartCam Web service access page, make search for JAVA Runtime Environment (hereinafter “JRE”) and check if your PC has installed the recommended version of JRE 1.6.10 or later. If not, install the latest version of JRE as recommended by the Company.
5) Start the SmartCam Web service PC having JRE 1.6 or earlier installed 1) Verify the Java version • In the SmartCam Web service access page, make search for JAVA Runtime Environment (hereinafter “JRE”) and check if your PC has installed the recommended version of JRE 1.6.10 or later. If not, install the latest version of JRE as recommended by the Company. • From the Verify Java page, click on the given button to check the Java version.
4) Agree to install JRE 6) Start installing Java 03 • Agree to install the latest version of JRE Monitoring 5) Move to the Verify Java page • I f you agree to upgrade the current Java version for a PC installing JRE version 1.6.10 or earlier or a PC not installing JRE, you will move to the Java Verify page. • If you have not installed Java yet, you will be prompted to install JRE with a message. • If you accept the installation of JRE, the installation process will start.
7) Verify Certificate 2. Select to register. After reading the terms of use, check on “I agree with”, and click . 3. Provide the requested information, and click . • M ove to the SmartCam Web page (www.samsungsmartcam.com), and you will be prompted to agree to run the application published by Samsung Techwin Co., Ltd. 8) Start the SmartCam Web service • ID : Enter the user ID and perform the duplicate check. Fill in the user ID in 8 ~ 12 alphanumeric characters.
4. Enter the and click the check. 7. When done, click . SAMSUNG SMARTCAM MODEL : SNH-1011N DC 5. OV 2. 2A M/C : SNH-1011N/US PV Apr 2012 S/N : XXXXXXXXXXXXXXX MAC ADDRESS. : XX-XX-XX-XX-XX-XX SAMSUNG TECHWIN CO., LTD. MADE BY SAMSUNG IN CHINA 5. Create a . nn `` If you want to change the private Key, please refer to on page 25. 8. nn `` Private key is required to prevent unauthorized access to the camera. `` 6.
Live Video 1. From the , select the camera to monitor and click < 3. When done, click . 4. Select
• < • < nn `` `` `` >:T akes a picture of current live image you are viewing. >:W hen enabled, you can hear what’s happening around the camera. Depending on the policy of the Internet service provider, the sound output may not be supported. (in either 3G UDP or Relay mode) Alarm Settings Camera has ability to send event notifications when motion or audio is detected. See the notification bar below the live view.
Notification 3. Click [Apply]. When enabled, you can record up to 30 seconds of video to your private YouTube account. 1. 2. 3. 4. Select Enable. Enter your YouTube user ID and password. Select public or private folder to save. By default, it’s set to private folder. Click [Apply]. you have set the private setting of the video image, no image will be found in portal sites. nn ```` IfRefer to the policy of Picasa for the maximum number of uploaded images.
❖❖ Notification 1) 2) 3) 4) 5) 6) In the friend’s list, it shows the IDs that camera is registered to and Google Talk friends that receives real-time notification from the camera. Notification When enabled, you can receive real-time event notification through Google Talk messenger and Smartphone push service. To receive instant event notification, add the camera as a friend to your Google Talk messenger account. You have to add the following user ID.
No. Live Video Setup Description You can configure the camera-related settings. Flip: You can flip over the video image. Video Setting e : Disable the screen rotation. Camera : Horizontally mirrors the video image against the vertical axis. : Vertically flips over the video image against the horizontal axis. : Rotate the screen by 180° Brightness: You can adjust the brightness of the screen image.
Network Setting a a b b c No. Description Wireless On/ Wireless Off You can select to activate or deactivate the wireless network connection. b AP (Access Point) list c AP (Access Point) password If you select a secured AP (Access Point), you must enter the password before you can access the network. For the password, contact your network administrator. a Dynamic IP Address If you select “Dynamic IP Address”, the IP address will be obtained automatically.
Time Setting Admin a Private Key b a No. Description a Time Zone Select your region. b Summer Time Check this option if you live in a country or region where DST(Daylight Saving Time) is applied. nn `` `` `` `` 26 · English The time will synchronize with the NTP(Network Time Protocol) server automatically. For this, Internet connection is required. You need to set the timezone correctly to obtain the exact time setting. The time displayed without Internet connection may not be accurate. No.
Update Firmware My Account XXXXXXXXXXXXXXX a No. Update Firmware Please update your current software version if it is lower than the final version. Monitoring a 03 Description If the final version is the same as or lower than the current version, the “Update Firmware” button will not be active. No update will proceed. nn `` Use the cable network if possible to update the firmware. `` `` If the power is off during the update, it will cause a fatal damage to the product.
Appendix Specifications 04 Specifications Product Appearance Troubleshooting 28 28 30 31 Specifications Specifications Item Description Video Imaging Device 1/5" 3M CMOS Effective Pixels 2,048(H) x 1,536(V) Scanning System Progressive Synchronization Internal Frequency 120MHz(MAX) Lens Focal Length (Zoom Ratio) 2.87mm Angular Field of View (D/V/H) 65.1°/ 42.9°/ 54.1° Min.
Item Description Operational Item Audio Compression Format G.711 Audio Communication 2-Way (Built-in Microphone, Speaker) Protocol TCP/IP, DHCP, SMTP, DNS, RTSP, RTCP, RTP, HTTP, TCP, UDP, STUN, XMPP, SIP, uPNP, ICE, SNTP, IPv4/v6, ICMP On Screen Display (Web Browser, Local page) English, French, Germany, Spanish, Italian, Chinese, Korean Camera Title Off / On (Displayed up to 15 characters) Day & Night Auto(Infra-red Cut Removable), Color, B.
Product Appearance 30 · English
Problem Troubleshooting If you encounter a problem with your system, see the table below to solve the problem as quickly and easily as possible. Please follow the instruction below: Problem Action I failed to connect wirelessly with the camera. -- If you encounter a frequent turn off of the wireless Internet LED, this may be caused by an improper place for the wireless Internet network. Come closer to the AP and try again.
Problem Action No sound is output from the video. -- Adjust the volume of the microphone or audio sound in the Setup page of the camera. -- Click the Voice icon in the video playback page, or check if the voice is turned On in your smart phone app. -- Depending on the policy of the Internet service provider, the sound output may not be supported. (in either 3G UDP or Relay mode) I forgot my Private key. -- You must create a new private key.
Samsung Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products. The Eco mark represents Samsung Techwin’s devotion to creating environmentally friendly products, and indicates that the product satisfies the EU RoHS Directive.
SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Fax : +1-201-373-0124 www.samsungsv.com SAMSUNG TECHWIN EUROPE LTD.