FCC TEST REPORT Report No.: EMC-FCC-R0168 http://www.emc2000.co.kr User Manual EMC compliance Ltd. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 443-390, Korea 82-31-336-9919 (Main) 82-505-299-8311 (Fax) This test report shall not be reproduced, except in full, Without the written approval.
SAMSUNG SMARTCAM User Manual 0678 ! SNH-E6110BN
SPECIFY SERVICE INSTRUCTIONS AND WARRANTY TERMS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.
• Especially, the power cord should be installed carefully while keeping it out of children’s reach. • Never use the product near bath tub, sink, washing machine and in wet basement to avoid moisture. • The product is designed for indoor use. • The product is not designed for medical monitoring, and requires a grown-up’s protective supervision on its use.
01 Getting Started Features4 What’s Included 5 Part names and functions 6 Power Supply Network connection 4 · English 7 7 Features • Easy to install -- Simply visit the home page (www.samsungsmartcam.com) and download and install the program without a separate installer program. • Remote monitoring -- Whenever and wherever if you are in the Internet enabled environment, remote monitoring is ready for you. -- PC, laptop or smart phone can be used for monitoring.
What’s Included Check for components when opening the product package. Power Adaptor Quick Start Guide Getting Started Camera 01 Warranty Card GPL Lisence nn `` Please save the packaging. You will need the serial number later to register the camera.
Part names and functions Camera lens Built-in Mic Power / Wi-Fi status LED Speakers Generate audio output from your smart phone. Wi-Fi Direct button Create a Wi-Fi connection for your camera and smart phone. Reset button Resets the camera settings to the default. Press and hold for about 10 seconds to reboot the system. DC 5V Power Input Connect to the power adoptor.
Power Supply Plug-in the camera power adapter to the wall outlet and connect the camera as shown. nn `` It will take about 1min for the camera to boot-up completely. When the boot-up is complete, the power LED color will change from red to blue. Connect the provided network cable to the camera’s network terminal. 01 For further details on network configuration, refer to “Network Connection and Settings”. (Page 9) LED status LED indicator shows operational status with colors.
02 Installation & Network Connection Installation Precautions Adjusting the Angle Network Connection and Settings Precautions Conneting using Wi-Fi WPS feature 8 · English 8 8 8 9 9 9 Installation Precautions 1. Install the camera in a place where the Wi-Fi signal can be reached and without interference. 2. Keep it away from humidity such as around the humidifier. 3. Keep it away from direct sunlight, strong light or dust; install it in a place with clear view. 4.
Network Connection and Settings Precautions What is WPS? WPS enables to make connection between the camera and the Wireless Access Point with a simple click of the button. 1. When you apply the power, the power status LED is lit red, and it will change to red blinking when the booting is completed. 2. Press the WPS button on the camera for 5sec. Wi-Fi Direct button mobile 3. Register and select the camera according to guide of mobile guide. 4.
Monitoring Registration Web browser requirements Starting SmartCam Live Video Monitoring options Setup Basic Info 10 · English 10 10 10 13 14 15 15 03 Network Time Alarm & Notification Alarm Schedule 17 18 19 21 Event Alarm 21 Information 22 My Account Support 22 23 Registration Registration is available only on the mobile camera. Web browser requirements Windows Windows XP, 7 supported - Internet Explorer 8 or higher (The 64-bit is not supported.
❖❖ Plug in installation 3) Click to begin the installation. 4) Installation has completed. You need to install your plug in view the video in your camera. login or click in a PC where the plug in is not installed, nn `` Iftheyouinstallation message window will pop up. `` 1) When you install the plug in, the web browser will be terminated and you need to launch it again. Click , run the setup file. 03 2) Monitoring For Windows Click .
For Mac 2) Click . 3) Click . 12 · English 4) Enter MAC PC password and click . 5) Installation has completed.
5. Enter the requested information, and click . Live Video 1. 03 nn `` The gray icon indicates the camera is inactive so you cannot monitor it right now. 2. Enter the camera password and click . on to access your camera without entering the password next nn `` Check time. `` 3. If you want to change the Camera password, please refer to on page 15. Live video will be displayed on the screen.
Monitoring options Item Description e WDR A dark spot will be brighter and a bright spot will be darker to compensate for the backlight. f Motion zone setting It detects motion within the range set by a user. g Flip You can flip over the video image. abc A user can directly save videos in their SD card. h d e f n m l g h i j k Item Description a Default Camera Set the default camera to monitor in the camera list. b Delete Camera Delete the registered camera.
❖❖ Network Speed Profile Name Low Speed Network Mid Speed Network High Speed Network Resolution VGA HD(720P) Full HD(1080P) Recommended bandwidth Frame rate 20 fps 0.7Mbps 30 fps 2.8Mbps 15 fps 1Mbps Setup Basic Info is relay mode? nn `` What If the network condition is unstable, the camera cannot make a normal connection `` `` 03 Relay mode is added feature where the video from the camera is transmitted to Samsung server then retransmitted to the user's computer.
Item Description a Serial number You can confirm the serial number. b Camera password Click the , you can change the Camera password. Enter the current camera password, and type a new Camera password. c Camera Name Click the , you can change the camera name. d Firmware Version You can check the current version and the latest version of your camera S/W. e Status LED You can turn on/off the LED in your camera.
Network Item You can select to activate or deactivate the wireless network connection. b AP (Access Point) list c AP (Access Point) password If you select a secured AP (Access Point), you must enter the password before you can access the network. For the password, contact your network administrator. d Hidden SSID a a b Description Wireless On/ Wireless Off You will see a list of APs (Access Point) available. Select a desired one from the list of APs (Access Point).
nn `` The time will synchronize with the NTP(Network Time Protocol) server automatically. Time `` `` `` a b c d e f Item Description a Time Confirm the camera's time. b Time Zone Select your region. c Display Time Select the time format displayed in time setting. d Automatic Time It sets camera's time automatically. e Daylight Saving Time Check this option if you live in a country or region where DST(Daylight Saving Time) is applied. f Time to show Live screen displays the time.
Notification Alarm & Notification Automatically uploads a image to your private Picasa account. Camera has ability to send event notifications when motion or audio is detected. 1. 2. 3. 4. Select the Google. Enter your Gmail address and password. Click . Check
Notification Push alarm Notification The push alarm is provided through the web viewer and mobile app in which the camera is registered. The event alarm is sent through Gmail. 1. Select the Google. 2. Enter your Gmail address and password. 3. Click . 4. Select
Alarm Schedule Event Alarm Alarms will only operate for the times selected by the user. You can check the event alarm that occurred. c d a b a e b Item Description a Only Scheduled Time Alarm function will only operate for the time/day designated by the user. b Always Alarm function always operates. Monitoring Item Description a Delete by dates Delete all the event alarms on the date.
Information My Account you want to change the member information, click on . Select the item nn `` If(password, or email address) and enter your information.
Support You can download the Samsung SmartCam mobile app and user guide.
Appendix 04 Specifications Specifications Product Appearance Troubleshooting 24 · English 24 24 26 27 Specifications Specifications OS Item Linux Description Resolution 1920x1080, 1280x720, 640x360 Max. Framerate 1080p@30fps Video Compression Format H.264, MJPEG Streaming Capability Multiple Streaming (Up to 5 Profiles) Angular Field of View (D/V/H) 77.6°/ 42.7°/ 69.
Audio I/O Item N/A Description G.711, G726 Audio Communication 2-Way Audio (Built-in Microphone & Speaker), Half Duplex Memory Slot N/A Recording & Playback Smartphone Recording Ethernet N/A Wireless Wi-Fi 802.11 b/g/n (2.4G Single-band) WiFi Direct Support (Push button) Security SSL (AES 256bit) Max.
Product Appearance 26 · English
Troubleshooting If you encounter a problem with your system, see the table below to solve the problem as quickly and easily as possible. Please follow the instruction below: Problem Action Camera is not connected to the wireless hub. -- If the camera's wireless internet indication LED goes off too often, then it means that the camera installation location is not optimal for the wireless internet environment, so in this case, locate the camera close to the wireless hub and try to connect again.
Samsung Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products. The Eco mark represents Samsung Techwin’s devotion to creating environmentally friendly products, and indicates that the product satisfies the EU RoHS Directive.
04 Appendix 29
SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsung Techwin R&D Center, 6, Pangyo-ro 319beon-gil, Bundang-gu, Songnam-si, Gyeonggi-do 463-400, Korea TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Toll Free : 1-877-349-3149 www.samsungsv.com SAMSUNG TECHWIN EUROPE LTD.
