SAMSUNG SMARTCAM User Manual SNH-V6430BN/ SNH-V6430BNH
Samsung SmartCam User Manual Copyright ©2016 +DQZKD 7HFKZLQ Co., Ltd. All rights reserved. Trademark Each of trademarks herein is registered. The name of this product and other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Copyright of this document is reserved. Under no circumstances, this document shall be reproduced, distributed or changed, partially or wholly, without formal authorization.
Instructions & Warranty The manufacturer is not responsible for any loss or radio/TV interference caused by unauthorized modification of the product. Such modification will void the warranty of the product as well as the user’s right of use. To comply with FCC RF exposurre compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. This device must not be co-located or operation in conjunction with any otheer antenna or transmitter.
Contents GETTING STARTED MONITORING 5 Features (SNH-V6430BN) 21 Registration 6 Features (SNH-V6430BNH) 26 Live Video 7 What’s Included (SNH-V6430BN) 29 Setup 8 What’s Included (SNH-V6430BNH) 36 Event Alarm 9 Part names and functions (SNH-V6430BN) 36 Playback 11 Part names and functions (SNH-V6430BNH) 38 Information INSTALLATION & NETWORK CONNECTION APPENDIX 13 Indoor/Outdoor bracket switching 39 Specifications 14 Installation (SNH-V6430BN) 44 Troubleshooting 16 Installat
Features (SNH-V6430BN) 5 Features (SNH-V6430BN) 6 Features (SNH-V6430BNH) 7 What’s Included (SNH-V6430BN) 8 What’s Included (SNH-V6430BNH) 9 Part names and functions (SNH-V6430BN) 10 Power Supply 11 Part names and functions (SNH-V6430BNH) 01 o Easy to install - The Wi-Fi Direct button allows easy connection to a wireless router. - Simply visit the home page (www.samsungsmartcam.com) and download and install the program without a separate installer program.
Features (SNH-V6430BNH) o Easy to install - The Wi-Fi Direct button allows easy connection to a wireless router. - Simply visit the home page (www.samsungsmartcam.com) and download and install the program without a separate installer program. o Remote monitoring - Whenever and wherever if you are in the Internet enabled environment, remote monitoring is ready for you. - PC, laptop or smart phone can be used for monitoring.
What’s Included (SNH-V6430BN) Check for components when opening the product package. 01 ` Power adapter and cable Quick Start Guide GPL Lisence Tapping screw Plastic anchor Getting Started n Camera Warranty Card Keep the packing container. You will need the serial number later to register the camera.
What’s Included (SNH-V6430BNH) Check for components when opening the product package. n 8 · English ` Camera PoE adapter & power plug LAN cable (10M) Quick Start Guide Warranty Card GPL Lisence Tapping screw Plastic anchor Keep the packing container. You will need the serial number later to register the camera.
Part names and functions (SNH-V6430BN) 01 Luminance Sensor Bracket knob Connect the camera and bracket. Wi-Fi Direct button 6 /22 (1 Camera lens 7 7,*+ (1 Wi-Fi is used for wireless communication between camera and smartphone. 5(6(7 Built-in IR LEDs for night vision Built-in microphone Power/Wi-Fi status LED Power Connection Button It connects with a power adapter. Reset button Resets the camera settings to the default.
Power Supply ❖ LED status LED indicator shows operational status with colors. Plug-in the camera power adapter to the wall outlet and connect the camera as shown. n ` ` ` Refer to table below for detailed meaning of the LED indicator. Color Make sure to use the provided power adaptor. If you use an adaptor other than the power supply adaptor provided in our package, the product may not operate properly. It takes about 30 seconds to reboot the camera completely.
Part names and functions (SNH-V6430BNH) 01 PoE connection port Luminance Sensor Detects light levels where the camera is placed. Night vision mode changes according to detection result. Camera lens Angle adjustment hinge Built-in IR LEDs for night vision Built-in microphone Wi-Fi Direct button Power/Network status LED Wi-Fi is used for wireless communication between camera and smartphone. 5(6(7 Reset button Resets the camera settings to the default.
4. Power Supply n Using the PoE adapter 1. Connect the LAN cable from the PoE adapter [DATA IN] socket to the LAN port of the router. 5. Push to insert the included PoE adapter in the power plug, as shown in the figure below. ` When connecting the camera wirelessly via Wi-Fi Direct, remove the LAN cable connecting the PoE adapter and the router. Plug the PoE adapter into an electrical outlet. n ` ` ` Use the PoE adapter and power plug that have been included with the camera.
1. 02 Outdoor bracket is available separately. Separating the indoor bracket 1. 18 Network Connection and Settings (SNH-V6430BN) Turn the knob on the back of the camera in the [LOOSEN] direction.
Installing the outdoor bracket 1. Installation (SNH-V6430BN) Install the outdoor bracket into the groove on the main body of the camera, as shown in the figure below. Precautions Main body 2. Turn the housing to the LOCK [ 1. Install the camera in a location with a good Wi-Fi signal and no interference. 2. Keep it away from humidity such as around the humidifier. 3. Keep it away from direct sunlight, strong light or dust; install it in a place with clear view. 4.
When installing on a concrete wall 3. Fix the bracket on the wall using screws and anchors. First, mark the wall on which the camera is to be installed as shown in the figure. 6. Insert a screw in each of the 2 holes in the wall, and tighten the screws using a Phillips screwdriver. 7. Connect the adapter plug to the power terminal of the camera. 02 8. On the mark, drill a hole to a depth of about 3cm in the wall using a drill bit and drill with a 5mm diameter for concrete.
Installation (SNH-V6430BNH) When installing on a concrete wall 2. Fix the bracket on the wall using screws and anchors. First, mark the wall on which the camera is to be installed as shown in the figure. 3. On the mark, drill a hole to a depth of about 3cm in the wall using a drill bit and drill with a 5mm diameter for concrete. Remove any debris remaining in the hole after drilling. Precautions 1. To facilitate monitoring, connect between the PoE adapter [DATA IN] port and the router. 2.
5. Insert a screw in each of the 3 holes in the wall, and tighten the screws using a Phillips screwdriver. 6. Connect the PoE adapter to the camera. 02 Insert the cable through the hole at the bottom of the bracket to prevent the cable from being pressed when installing the camera. Adjusting the camera angle 1. Turn the bracket knob counter-clockwise. 2. Adjust the angle adjustment hinge to set the desired camera angle. 3. Turn the bracket knob clockwise to fasten.
Network Connection and Settings (SNH-V6430BN) Precautions o The wireless network access may fail, depending on the communications environment. o For details about the network settings and password, contact your network administrator or service provider. o For a specific Internet service requiring user authentication, you may not access the service. If this is the case, contact the service provider. o Do not access the unauthorized network.
Network Connection and Settings (SNH-V6430BNH) Connecting via network cable If a wireless router is not available, connect a home router directly to the PoE adapter to which the camera is connected using a LAN cable. 1. Turn the power on and the LED will turn red. The red light will flicker when bootup is complete. 2. As shown in the figure below, LAN Precautions 02 Internet Service 3. When the camera is connected to the router, the LED turns blue.
Connection using the Wi-Fi Direct function What is Wi-Fi Direct? Using Wi-Fi Direct, you can easily connect your camera to a router without a cable. 1. When the power is connected, the power status LED lights up in red and starts blinking when boot-up is complete. 2. Press and hold the Wi-Fi Direct button on the camera for 5 seconds, and the color of the LED will change to yellow/orange. Mobile Wi-Fi Direct Button 3.
Registration 21 Registration 03 36 Event Alarm 21 Web browser requirements 21 Starting SmartCam 36 Playback 26 Live Video 38 Information 27 Monitoring options 38 My Account 38 Support 29 Setup 29 30 32 33 34 35 Basic Info Network Time Alarm & Notification Schedule SD card For the SNH-V6430BNH model, camera registration can be performed not only from a smartphone through wired/wireless connection, but also though a PC or laptop computer.
❖ Plug in installation 3) Click to begin the installation. 4) Installation has completed. You can only see the camera image after installing a plug-in. n ` ` 1) If you login or click in a PC where the plug in is not installed, the installation message window will pop up. When you install the plug in, the web browser will be terminated and you need to launch it again. Click , run the setup file. For Windows 2) Click .
For Mac 2) Click . 3) Click . 4) Enter MAC PC password and click . 5) Installation has completed.
5. Enter the requested information, and click . 6. According to the network connection and setting, click when the camera LED turns into green. o ID : Using alphabetical characters and numbers, make a combination using 8 to 14 letters. o Password : To strengthen security, create a password with a combination of special characters, numerals and English letters. 7. Select the serial number of the camera to be added from the camera search list.
9. Create and . 10. Click . n 13. Enter the password of your Wireless Network and click . 03 The camera password is used to block the unauthorized access to your camera. Create camera password using alphanumeric characters between 1 to 8 without any space. 11. After adding the camera, click in the wireless network setup pop-up window. n ` ` Monitoring ` ` 12. Select your Wireless Network from the list.
15. Unplug the network cable from the camera and the router. 16. Click if the button is activated. Live Video 1. 17. Once the camera is successfully registered, you can check the camera in the camera list. Select a camera from the camera list at the upper left hand of the screen. n 2. ` Enter the camera password and click . n ` ` 3. 26 · English The gray icon indicates the camera is inactive so you cannot monitor it right now.
Item Monitoring options b c q m Night Vision WDR Compensate the backlight by brightening any dark areas and darkening any bright areas. Motion zone setting It detects motion within the range set by a user. Flip/Mirror You can flip/mirror the video image. Network Speed ` Set the network speed (low/mid/high). A user can directly save videos in their SD card. ` Manual recording ` Item Description Default Camera Set the default camera to monitor in the camera list.
Item n Description ` Converts the current image to full screen size. m n Full screen ` ` You can adjust the brightness of the screen image. Hide/unhide detailed menu Click on the [ Add a camera The SNH-V6430BNH model does not support a speaker or the interactive audio function. Click the [ ` ` ` ] icon to unhide or hide detailed setting menu. Adjust the volume of the built-in microphone and speaker of the camera as appropriate.
Item Description Setup Serial number You can confirm the serial number. Basic Info b Camera password Click the , you can change the Camera password. Enter the current camera password, and type a new Camera password. c Camera Name Click the , you can change the camera name. Firmware Version You can check the current version and the latest version of your camera S/W.
❖ Firmware update Network If the currently used S/W is not of the latest version, update it. If you are using the latest version, then the firmware will not be activated. 1) Click . 2) Click the < 3) When the firmware update is finished, the camera will reboot. n ` ` J ` 30 · English b > icon to update the firmware. The duration of the firmware update depends on the size of the firmware file and the network connection speed.
n ` ` ` ` ` SNH-V6430BNH supports wired network setup. Item If any of the manual settings is wrong, the network settings will not be applied. If you have both cable and wireless network connections simultaneously, the cable network connection is prioritized. If you switch from the current wireless connection to the cable connection, the network will switch to cable connection accordingly.
n Time ` ` ` b c Item Description Time Confirm the camera's time. b Time Zone Select your region. c Display Time Select the time format displayed in time setting. Automatic Time It sets camera's time automatically. Daylight Saving Time Check this option if you live in a country or region where DST(Daylight Saving Time) is applied. Time to show Live screen displays the time.
Notification Alarm & Notification The event alarm is sent through Gmail. Camera has ability to send event notifications when motion or audio is detected. ` Enter your Gmail address and password. 3. Select
Push alarm Notification Schedule For users whose cameras are registered, a push alarm is provided via the Web app and the mobile app. When the user designates a desired day and time, the alarm works only at the designated time. b o Push alert list shows the list of IDs of users who registered cameras. When an alarm occurs, the web site will send push alerts to each smart phone.
Item SD card When an event occurs, it is saved in an SD card. Overwrite ` SD Card Status Check the remaining capacity of your SD card and delete all the data. n b c Item ` ` ` ` ` When there is storage capacity of 10% remaining, the top notification window will show an alarm. Turn off the camera power or set it to before removing the micro SD card. If you fail to do this, the data in the micro SD camera may be damaged.
Event Alarm Playback You can play a video saved on the SD card and download it to the PC. You can check the event alarm that occurred. b c Item Description Delete by dates Delete all the event alarms on the date. b Delete All Delete all the event alarms for thirty days. c Display Events Displays the number of events occurred in the 30 day list. Arrange by types Arrange the event list by event types.
Item Description Downloads a manually recorded video/motion/audio event saved on the SD card to the PC. ` Downloading a recorded video ` ` Downloading is only available when the computer and the camera are connected to the same network router. Downloading may be unavailable if the network is unstable or there is access by multiple users. The function to download a recorded video is supported by the Smart Cam mobile app for Android smartphones (not supported in the iOS app).
Information My Account n ` 38 · English If you want to change the member information, click on . Select the item (password, or email address) and enter your information. Support You can download the Smart Cam mobile app and its user manual.
APPENDIX 39 Specifications 04 Specifications Description Item SNH-V6430BN SNH-V6430BNH Video Imaging Device 1/3" CMOS Effective Pixels 1944(H) x 1092(V) Low Light Performance Color : 0.
Description Description Item Item SNH-V6430BN SNH-V6430BNH Digital Zoom 4x(mobile), 10x(Web) Flip / Mirror Off / On Motion detection Supported Audio detection Supported Alarm trigger Motion Detection, Audio Detection, Motion Zone Selection, Sound Alert (police siren, alarm Siren, dog barking) Event responsive motion Push alarm (PC and mobile terminal) Notification via email Memory slot SDXC memory slot (up to 128GB) Protocol Security - RJ-45 WiFi 802.11 a/b/g/n/ac, 2.
Description Item SNH-V6430BN SNH-V6430BNH Mechanical Color / Material White / Plastic Dimension (ØxH) Φ69mm × 42.5mm (Φ69mm × 48.4mm × 99.5mm with bracket) Φ78mm × 72mm (Φ78mm × 118.5mm with bracket) Weight 163g 271g Adaptor 0°C ~ +40°C (+32°F ~ +104°F) Color / Material White / Plastic Dimensions 68mm × 38mm × 27mm 60mm × 96.6mm × 36mm Cable Length 2.5m Distance between the router and the camera: 70m max.
Product Appearance (SNH-V6430BN) unit: mm (inch) 99.5 Ø69 42 · English 42.
Product Appearance (SNH-V6430BNH) unit: mm (inch) Ø78 72 04 Appendix 43
Troubleshooting If you encounter a problem with your system, see the table below to solve the problem as quickly and easily as possible. Please follow the instruction below: Problem Action I forgot my user ID/ password. - Move to “Log-in page Forgot your ID/Password?”, and enter the registered e-mail address to which we will send you the user ID and/or a new password. It can be spammed out depending on the policy of the email server.
Hanwha Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products. The Eco mark represents Hanwha Techwin's devotion to creating environmentally friendly products, and indicates that the product satisfies the EU RoHS Directive.
Head Office 86 Cheonggyecheon-ro Jung-gu Seoul 04541 Korea Tel +82.2.729.5277, 5254 Fax +82.2.729.5489 www.hanwha-security.com +DQZKD 7HFKZLQ $PHULFD 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Tel +1.877.349.3149 +DQZKD 7HFKZLQ (XURSH 2nd Floor, No. 5 The Heights, Brooklands, Weybridge, Surrey, KT13 0NY, UK Tel#1 00800.8010.8022 Tel#2 +31.77.326.