Manual

overview
14_ overview
Inside
Item Description

Lens Lens for the camera.
b
Reset Button
The button restores all camera settings to the factory default.
Press and hold for about 5 seconds to reboot the system.
J
If you reset the camera, the network settings will be adjusted so that
DHCP can be enabled. If there is no DHCP server in the network, you
must run the IP Installer program to change the basic network settings
such as IP address, Subnet mask, Gateway, etc., before you can
connect to the network.
c
Video Out Port Analog video output port. (for installation)

Micro SD Memory
Card Compartment
Compartment for the Micro SD memory card.

Power indicators POWER
ON : While the power is on
OFF : If the power is off

Camera fixing hole Hole used for securing the camera onto a ceiling.

b
c

