User's Manual

configure settings
16_ configure settings
Delete Devices
1. Select a device to delete and press the <Delete> button.
2. An initialization confirmation pop-up window will appear.
By pressing the <Initialize> button, the selected device will be deleted.
3. By pressing the <Delete All> button and the <Initialize All> button in the pop-up window,
all registered devices will be deleted.
CONTROL
Language
You can select a preferred language for the user interface.
1.
Press <Language>.
2. From the Language selection screen that
appears, use the direction buttons or joystick
to select a preferred language.
`
The language will be changed to the selected one
immediately.
3. To exit the language selection screen, press
<Cancel>.
3. Press the <ID/PW> button to enter an ID,
password and port number.
4. Press the <TEST> button to access the
camera.
5. Check the test results.
6. Press the <OK> button to complete the
registration.
•
Adding an analog device
1. Select the <Manual registration> check box
and press the <OK> button.
2. Select <Analog> as the device type.
3. Select each item to enter the ID, type,
protocol, and transmission speed.
`
By selecting <Analog Camera> as the type,
protocol can be selected.
4. Press the <OK> button to complete the registration.
Modify Device Information
You can modify the information of a registered device.
1. Select a device to change the information.
2. In the device information section displayed at
the bottom of the screen, modify the device
information.
`
Depending on the type of device selected, the
information to be modified will be displayed
differently.
3. After you finish changing the device
information, press the <OK> button.