User's Manual

English _17
●
CONFIGURE SETTINGS
User & Password
You can change the administrator’s password and grant a device ID.
To add a user
1. Select <User & Password> from the menu.
2. Click the <Add> button.
3. Select a device to assign to the user.
4. Select whether to use a password.
5. To use a password, press <ON> and set a
password to use.
6. After setting a password, press the <OK>
button.
M
`
If the password does not conform to the password policy, you will need to select a password that meets the
password requirements.
To modify user information
You can change the password on the user information page.
1. Select a user whose information you want to
modify and press the <Modify> button.
2. Set the details to modify again.
`
Only an "admin" can change the password.
3. After setting the password, press the <OK>
button.
To delete a user
You can select and delete a registered user.
1. By selecting the user to delete and then pressing the <Delete> button, the pop-up window
to confirm delete will appear.
2. Press the <OK> button and the user selected will be deleted.
3. By pressing the <Delete All> button and the <OK> button in the pop-up window, all
registered devices will be deleted.
`
Since “admin” is the administrator, it cannot be deleted.
Joystick Button Operation
Select the items to use with the joystick button,
and press the <OK> button.
The function operates according to how the
joystick is selected.
Setting the controller ID
When connecting between controllers, you may set it as a main or sub controller, and the ID
and protocol of the controller to be used can be selected.
1.
Select the <Controller ID> menu.
2. Enter the controller ID to be used.
3. Select either RS-485 or RS-422 to set the
communication method of the controller.
4. Select the main or sub controller and set the
details.
`
When using while connected to multiple controllers,
set the sub list.
5. When the setting is complete, click the <OK> button.