Quick Manual

1
How to install the product
M
` The images below are based on the TRM-1610S model.
1 Remove the mounting bracket and side brackets.
2 Tighten the side brackets to the body.

Screw for bracket
assembly
USB 2.0
USB 3.0
AUDIO
POWER
REC
ALARM
VGA
GPS ANT
HDD1
HDD2
HDMI
USB 2.0
Screw for bracket
assembly
3 Install the mounting bracket at the installation site.
4 Install the main body with the side brackets in the bracket installed in Step 3.

Mounting
screws
USB 2.0
USB 3.0
AUDIO
POWER
REC
ALARM
VGA
GPS ANT
HDD1
HDD2
HDMI
HDD handle
J
` Be sure to observe the work procedure (1 - 4) when installing the product, and pay attention to potential accidents caused by the
product falling.
` When moving the set, do not move it while holding the HDD handle.
How to install the control box
M
` The images below are based on the TRM-1610S model.
Assemble mounting screws and install the camera on a wall/floor/ceiling as shown in the figure.
Connect to the main unit via the control box connection cable.

Mounting
screws
CONTROL BOX RS-232C ALARM BLOCK
CONSOLE
DC 9V~36V
VIEWER CAMERA
WIFI ANT2 WIFI ANT1
PoE1 PoE2 PoE3 PoE4
CONTROL BOX RS-232C
CONSOLE
DC 12V-36V
VIEWER
WIFI ANT1
POE1 POE2 POE3 POE4
Control box
English
Package Contents
M
` The appearance of the components may differ from the image shown.
` Accessory category and quantity may differ depending on sales region.
TRM-1610S/1610M
USB 2.0
USB 2.0
USB 3.0
AUDIO
HDD 1
HDD 2
GPS ANT
POWER REC ALARM
VGA
HDMI
NVR Power cable
User Manual CD User Manual or Quick Manual
Wi-Fi antenna Mounting bracket Screw for bracket assembly Mounting screws
HDD fixing screws HDD lock key M12 to USB cable GPS antenna
Control box / Control box connection
cable
Alarm cable
TRM-410S/810S/810M
POWER REC ALARM
CONSOLE AUDIO
USB 2.0 USB 2.0
HDMI
VGA
HDD 1
HDD 2
NVR Power cable
User Manual CD User Manual or Quick Manual
Wi-Fi antenna Mounting bracket Screw for bracket assembly Mounting screws
HDD fixing screws HDD lock key GPS Module Control box