Quick Manual

2
Installing the HDD
M
` The images below are based on the TRM-1610S model.
1 Unscrew the HDD bracket fixing screws on the front of the set and pull it to the front to separate the HDD.
` If the lock on the front is locked, open the lock using the key that was provided when you purchased the product.
USB 2.0
USB 3.0
AUDIO
POWER
REC
ALARM
VGA
GPS ANT
HDD1
HDD2
HDMI
AUDIO
POWER
REC
ALARM
USB 2.0
USB 3.0
AUDIO
POWER
REC
ALARM
VGA
GPS ANT
HDD1
HDD2
HDMI
USB 2.0
USB 3.0
AUDIO
POWER
REC
ALARM
VGA
GPS ANT
HDD1
HDD2
HDMI
 
2 Loosen the screws on the front/rear of the bracket
and separate the bracket.
3 After replacing/installing the HDD, fix the HDD and
bracket with screws.
4 Slide the bracket with the HDD into the main body,
and tighten the screws to fix it.
USB 2.0
USB 3.0
AUDIO
POWER
REC
ALARM
VGA
GPS ANT
HDD1
HDD2
HDMI
J
` If you are adding a new or previously used HDD to this product in addition to the HDD(s) originally installed, format the new HDD
manually in the set before use.
` For replacement or installation of an additional HDD you must contact your dealer or our customer center.
TRM-810S/TRM-810M/TRM-410S
1 Unscrew the HDD bracket fixing screws on the front of the set and pull it to the front to separate the HDD.
` If the lock on the front is locked, open the lock using the key that was provided when you purchased the product.
CONSOLE
AUDIO
USB 2.0 USB 2.0
HDMI
VGA
HDD 1
HDD 2
POWER
REC
ALARM
AUDIO
USB 2.0
HDMI
VGA
CONSOLE
AUDIO
USB 2.0 USB 2.0
HDMI
VGA
HDD 1
HDD 2
POWER
REC
ALARM
CONSOLE
AUDIO
USB 2.0 USB 2.0
HDMI
VGA
HDD 1
HDD 2
POWER
REC
ALARM
 
2 Remove the screws from the bracket to separate the bracket.
 
3 After replacing/installing the HDD, fix the HDD and
bracket with screws.
4 Slide the bracket with the HDD into the main body, and
tighten the screws to fix it.
CONSOLE
AUDIO
USB 2.0 USB 2.0
HDMI
VGA
HDD 1
HDD 2
POWER
REC
ALARM
J
` Make sure to properly place the fan connector when installing HDD.