Quick Manual

4
Configure and run layout
You can use the same layout set on the live screen for the Search Time function in order to perform a search using
the channel sequence and combination configured by the user.
M
` For more information about the detailed setting method for each stage, refer to the user manual.
1 Live channel layout settings
def
c
g
a
b
a Open the channel layout setup menu.
b Click <New>.
c Enter a name for the selected channels (e.g., Indoor).
d Select the channels that you want to add to the layout (e.g., 1, 2, 3, 4).
e Choose a split mode to apply (e.g., 4-way split).
f Click <OK>.
g Choose a layout to view it on the screen (e.g., change to Indoor).
2 Search/Play
a
a In live mode, right-click to select <Search>.
Select <Time Search>.
2-1 Search
d
b
c
a
e
a The initial search option is set to <All Channels>. Select a desired layout from among the channel group
created in the live screen.
b Select a channel for each selected group.
c Move the time bar to view the preview screen as shown in Figure d.
e Press the <Play> button to enter the play screen.
2-2 Play
a b
c
a These are the various functions available for playback. Hover over them and a tool tip will be prompted.
Control the playback by referring to the tool tip.
(Ex : Skip Backward)
b You can configure specific functions in a through playback settings.
Ex) Jump to play: 10 minutes, 30 minutes, 1 hour, 24 hours, etc.
c Displays functions that are operating in split mode and during other playback.
3 Backup
Right-click on the live screen and select <Backup>.
a Select a layout.
b Select a channel.
c Set the time, device, and format to back up.
d Click the <Check capacity> button to check if backup is possible.
e Click the <Start> button to proceed with the backup.