User Manual

English _11
! ONE-WAY CAMERA
Inside
<MGC-D8080LI>
a b c d e
hi gj f
<MGC-D8080>
a c d e
hi gj f
Item Description
a
PoE+ port Used to connect the PoE+ or Ethernet cable for network connection.
b
LED light Lights in various colors depending on the detected parking situation.
c
Alarm I/O / Power port
(DC 12V)
Connects the large port part of the audio/alarm/power cable for the connection of Alarm I/O
and power.
d
Auto focus button It automatically performs lens adjustment for focusing while installing the camera.
e
MICRO USB port
Port to connect the WiFi dongle.
You can check the installation video through the applications installed in the smartphone.
Refer to “Connecting WiFi” on page 30.
`
Wifi dongle and OTG adapter are sold separately.
f
Test monitor out port
Output port for test monitoring the video output. Use the test monitor cable to connect to a
mobile display and check the test video.
g
Audio cable port
Connects the small port part of the audio/alarm/power cable for the connection of speaker
and microphone.
h
Reset Button
The button restores all camera settings to the factory default.
Press and hold for about 5 seconds to reboot the system.
J
If you reset the camera, the network settings will be adjusted so that DHCP can be
enabled. If there is no DHCP server in the network, you must run the Device Manager
program to change the basic network settings such as IP address, Subnet mask,
Gateway, etc., before you can connect to the network.
i
Micro SD card slot Compartment for the Micro SD card.
j
Lens Lens for the camera.