User Manual
Table Of Contents
- overview
- One-way camera
- LED parking indicator light
- installation & connection
- network connection and setup
- Connecting the Camera Directly to Local Area Networking
- Connecting the Camera Directly to a DHCP Based DSL/Cable Modem
- Using Device Manager
- Automatically searching camera
- Configuring IP address
- Manually registering camera
- Automatically configuring IP
- Port Range Forward (Port Mapping) Setup
- Connecting to the Camera from a Shared Local PC
- Connecting to the Camera from a Remote PC via the Internet
- web viewer
- appendix
English _15
! ONE-WAY CAMERA
3. Place the mount plate rubber onto the upper part of the mounting adapter, and then insert it into the drilled
hole.
4. At the top of the raceway, insert the mounting adapter nut into the adapter to complete the mount plate
installation.
5. Pull out the cables for audio/alarm/power and the network cable through the mounting adapter.
Installing on the raceway bracket or structure (mount plate)
1. Attach the installation template on the desired surface and drill holes for screws and cables.
2. Fix the mount plate using appropriate screws.
~
Not Included
4x
3. Pull out the cables for audio/alarm/power and the network cable through the mount plate.