User Manual
Table Of Contents
- overview
- One-way camera
- LED parking indicator light
- installation & connection
- network connection and setup
- Connecting the Camera Directly to Local Area Networking
- Connecting the Camera Directly to a DHCP Based DSL/Cable Modem
- Using Device Manager
- Automatically searching camera
- Configuring IP address
- Manually registering camera
- Automatically configuring IP
- Port Range Forward (Port Mapping) Setup
- Connecting to the Camera from a Shared Local PC
- Connecting to the Camera from a Remote PC via the Internet
- web viewer
- appendix
One-way camera
16_ One-way camera
Mounting the camera body
1. Insert the camera body into the mount plate.
`
Align with the hinges as shown in the figure and then insert it.
2. Remove the cable bushing from the camera body.
[Installing the network cable]
3. Remove the protruding part on the removed cable bushing.
4. Use the cap installer to route the network cable through the cable bushing.
Cap Installer
5. Insert the cable bushing of the network cable into the camera body.