User Manual
Table Of Contents
- overview
- One-way camera
- LED parking indicator light
- installation & connection
- network connection and setup
- Connecting the Camera Directly to Local Area Networking
- Connecting the Camera Directly to a DHCP Based DSL/Cable Modem
- Using Device Manager
- Automatically searching camera
- Configuring IP address
- Manually registering camera
- Automatically configuring IP
- Port Range Forward (Port Mapping) Setup
- Connecting to the Camera from a Shared Local PC
- Connecting to the Camera from a Remote PC via the Internet
- web viewer
- appendix
English _17
! ONE-WAY CAMERA
6. Connect the connector of the network cable to the camera’s PoE+ port.
[Installing the Audio/Alarm/Power cables]
7. Mount the cable bushing of the provided audio/alarm/power cables to the camera body.
8. Connect the small terminal part of the audio/alarm/power cable to the audio cable port, and then connect
the large terminal part to the alarm I/O and power (DC 12V) port.
9. Lift the camera body and then fix it to the mount plate with the 2 fastening screws.
TR20
2x
10. Adjust the lens to the desired direction with reference to “Adjusting the monitoring direction for the
camera” section. (page 19)
`
Because tilting the lens may cause screen occlusion, adjust the lens in this case.
`
Monitor and adjust the lens after connecting a monitoring device to the USB port or the monitor output port. (page 29)
`
Press the focus button for auto focusing.