User Manual
Table Of Contents
- overview
- One-way camera
- LED parking indicator light
- installation & connection
- network connection and setup
- Connecting the Camera Directly to Local Area Networking
- Connecting the Camera Directly to a DHCP Based DSL/Cable Modem
- Using Device Manager
- Automatically searching camera
- Configuring IP address
- Manually registering camera
- Automatically configuring IP
- Port Range Forward (Port Mapping) Setup
- Connecting to the Camera from a Shared Local PC
- Connecting to the Camera from a Remote PC via the Internet
- web viewer
- appendix
One-way camera
18_ One-way camera
Assembling the cover
1. Turn the 6 fixing screws for the body protection cover clockwise to fix the body protection cover with the
provided Torx L wrench.
TR20
6x
2. Place the skin cover all the way over the body protective cover, and then press 2 front parts of the skin
cover as shown in the figure below.
3. With the provided Torx L wrench, turn the 2 fastening screws for the skin cover on the rear of the product
clockwise.
TR20
2x