User Manual
Table Of Contents
- overview
- One-way camera
- LED parking indicator light
- installation & connection
- network connection and setup
- Connecting the Camera Directly to Local Area Networking
- Connecting the Camera Directly to a DHCP Based DSL/Cable Modem
- Using Device Manager
- Automatically searching camera
- Configuring IP address
- Manually registering camera
- Automatically configuring IP
- Port Range Forward (Port Mapping) Setup
- Connecting to the Camera from a Shared Local PC
- Connecting to the Camera from a Remote PC via the Internet
- web viewer
- appendix
English _29
! INSTALLATION & CONNECTION
J
`
The Test Monitor Out port of the product is provided for easier installation, and is not recommended for monitoring purposes.
(MGC-D8080LI/MGC-D8080)
`
The Micro USB port of the product is provided for easier installation, and is not recommended for monitoring purposes.
(MGC-D8080LI/MGC-D8080)
Ethernet Connection
Connect the Ethernet cable to the local network or to the Internet.
Powering and networking
Connect the PoE+ device with the PoE+ port of the camera.
J
`
Connect and use a PoE+ enabled router.
`
Use a PoE+ device that complies with the IEEE 802.3at standard.
`
If you connect using an PoE+ enabled router, you don’t need a separate power supply cable to power it on.
`
The MGL-D8080 model can use the PoE power. Connect and use a PoE enabled router.
CONNECTING WITH OTHER DEVICE
WiFi dongle
Power
PoE Router
<MGC-D8080LI/MGC-D8080>
Monitor for installation
Power
PoE Router
<MGL-D8080>
installation & connection