User Manual
Table Of Contents
- overview
- One-way camera
- LED parking indicator light
- installation & connection
- network connection and setup
- Connecting the Camera Directly to Local Area Networking
- Connecting the Camera Directly to a DHCP Based DSL/Cable Modem
- Using Device Manager
- Automatically searching camera
- Configuring IP address
- Manually registering camera
- Automatically configuring IP
- Port Range Forward (Port Mapping) Setup
- Connecting to the Camera from a Shared Local PC
- Connecting to the Camera from a Remote PC via the Internet
- web viewer
- appendix
installation & connection
30_ installation & connection
Power Supply
Use the screwdriver to connect each line (+, –) of the power cable to the corresponding power port of the
camera.
J
`
If the power sources for PoE+ and DC 12 V are simultaneously turned on, the device power will be supplied by both of PoE+
and DC 12 V.
- It is advisable to use only one power source from PoE+ and DC 12V.
`
The MGL-D8080 model can use the PoE power.
`
Be careful not to reverse the polarity when you connect the power cable.
`
If you want to connect an external device, you must turn off the external device before proceeding.
`
Connect the power cables to the camera and the adapter, and then insert the power plug into the outlet.
Power Cable Specification
In case of DC 12V Input:
Model name Wire Type (AWG) Cable Length (Max.)
MGC-D8080LI
#18 15 m
#16 24 m
MGC-D8080
#18 21 m
#16 30 m
MGL-D8080
#22 17 m
#20 27 m
MGC-F9010LI
#18 14 m
#16 22 m
Network Cable Specification
Item Contents Remark
Connector
MGC-D8080LI / MGC-D8080 :
RJ45 (10/100/1000BASE-T)
MGL-D8080 :
RJ45 (10/100BASE-T)
Ethernet
MGC-D8080LI / MGC-D8080 :
10/100/1000Base-T
MGL-D8080 :
10/100Base-T
Cable Category 6
Max Distance 100 m DC Resistance ≤ 0.125 Ω/m
PoE Support IEEE 802.3at
Connecting WiFi
Camera Setup
1. Connect OTG adapter (5-pin) and WiFi dongle to the micro USB port.
Smartphone Setup
1. Install the Wisenet Installation application.
2. Select the camera SSID after turning on the WiFi.
3. Run the Wisenet Installation application.
4. When you log in to the camera, the video will be connected.
`
The video will be played without being logged in during the initial connection.
5. You can adjust angle of view while watching the video through smartphone.
Recommended dongle manufacturer
Manufacturer Model
NETIS WF2123 n300
EDIMAX EW-7811Un V2 (New ver.)
IP Time N100mini
IP Time N105L
TP-LINK TL-WN823N V1
TP-LINK TL-WN725N
TP-LINK T2U Nano
ASUS USB-N13
ASUS USB-N10 NANO
NETGEAR WNA3100M
IODATA WN-G150UMW
IODATA WN-S150UM
TOTOLINK N300UM