Installation Instructions

● basic setup method II
- Without Main controller, wiring conference system simply using Stand unit only (Stand Alone Mode)
- setting procedure
1. Place Stand unit to conference location (embed folding-Mike and battery-pack)
2. Setting Chairman Stand unit to MASTER
3. Power on each Stand unit pressing front-TALK-button by 2~3 seconds
4. Check synchronization between MASTER stand unit and member stand unit (Antenna icon appears in
the LCD of Stand unit)
5. Touch Stand unit-TALK-button, then the Mike goes to ON status
6. Considering conference management type, change Main controller and Stand unit setting
basic setting methodㅣ13
2.4GHz Digital Wireless Conference System
※ Reference
- Hear Audio output of conference system through internal-speaker of each Stand unit
connection 가
능함.