User's Manual

11 / 21
Default Gateway: WKHURXWHU¶VGHIDXOWLV0.0.0.0,you can according request to
change it.
DHCP: you can select one of Server
,Disable,Client. Default is Server .that
the DHCP Server can configure the TCP/IP protocol of your LAN
computer automatically. For the Server
mode, it must fill in the DHCP
client address range.
DHCP Client Range: default is 192.168.1.100
-192.168.1.200. Click to
show client
button to display the DHCP client information.
Domain Name: default is Realtek
.
802.1d spanning tree: you can select Disable
or Enable. default is Disable.
Clone MAC Address: you can input a MAC address for use clone function.
3.3.5 WAN Settings
This page is used to configure the parameters for Internet network which
connects to the WAN port of your Access Point. Here you may change the access
method to Static IP, DHCP, PPPoE by click the item value of WAN Access
type.
A. Static IP
If your access type is Static IP
, It means you have static IP address ISP
supply, so you need to fill in follow details:
IP address7KHURXWHU¶V:$1,3DGGUHVVWKDWWKH,63VXSSO\,I\RXQRWVXUH
can check with ISP.