User's Manual

11 / 14
After you select ‘Yes’ or ‘No’ in previous step, network card will
attempt to connect to WPS-compatible AP, and an 8-digit number
will appear. Please input this number to AP’s configuration menu
within 2 minutes, and network card will establish secure
connection with AP automatically.
To stop this procedure before connection is established, click
‘Cancel’.
Push Button
To use Push-Button WPS configuration, please click ‘Push
Button Config (PBC)’ button. This is the easiest way to establish
secure connection by WPS, but if there’re more than one
WPS-compatible AP using Push-Button config, please use PIN Code
instead.