User Manual
Congratulations on the acquisition of your new HARBINGER
watch. The following instructions have been provided to
prepare your watch for everyday use and to help you familiarize
yourself with the proper operation and care of your new watch.
To ensure your watch ticks for years to come, please read and
follow the instructions carefully.
01
FITTING THE HARBINGER
The HARBINGER MARAUDER model comes with a 316L surgical grade stainless steel bracelet
in brushed finish. The length of this bracelet can be adjusted by either removing or adding links to
it. To take out a link, push the pressure pin out in the direction of the arrow on the link.
06
03
02
Crown [A] position
(Normal position)
Crown [B] position
Crown [B] position
A
B
C
A
B C
04
Normal position1.
2.
3.
4.
positionCrown out to the
positionPush back to
Turn the crown to set hour and
minute hands
Normal position1.
2.
3.
positionCrown out to the
4. positionPush back to
Turn the crown counter-clockwise
to set the date
Do not set the date between
9:00PM and 4:00AM as t his
may cause a malfunction.
SETTING THE TIME
Normal position1.
2.
Turn the crown clockwise to wind
up the mainspring
Wind by turning the crown clockwise
8 times. It will start to move naturally
after shaking slightly.
To wind up with winding machine.
Full wind up conditions:
Rotary speed: 30rpm
Operating time: 60rpm
A B C
05
WIND UP THE MAINSPRING
A
B C
SETTING THE DATE
A B C