M100-BT Portable PAs OWNER’S MANUAL M100-BT
WARRANTY/CUSTOMER SUPPORT 2 YEAR HARBINGER LIMITED WARRANTY Retailer and manufacturer shall not be liable for damages based upon inconvenience, loss of use of product, loss of time, interrupted operation or commercial loss or any other incidental or consequential damages including but not limited to lost profits, downtime, goodwill, damage to or replacement of equipment and property, and any costs of recovering, reprogramming, or reproducing any program or data stored in equipment that is used with Harbing
TABLE OF CONTENTS Warranty/Customer Support.....................................................................................................2 Table of Contents, Welcome, Bluetooth Troubleshooting........................................................3 Important Safety Instructions.................................................................................................. 4-5 M100-BT: Quick Start Guide.................................................................................................
IMPORTANT SAFETY INSTRUCTIONS Please keep this instruction manual for future reference and for the duration of owning the M100-BT or M200-BT MUV Series Portable PA. Please carefully read and understand the instructions inside this owner’s manual before attempting to operate your new powered loudspeaker. 14. Refer all servicing to qualified service personnel.
IMPORTANT SAFETY INSTRUCTIONS HEARING DAMAGE AND PROLONGED EXPOSURE TO EXCESSIVE SPLs To prevent electric shock, do not use a polarized plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.
QUICK START GUIDE: M100-BT SETTING UP / HELPFUL TIPS • Make sure the Power Switch is off. • Turn HIGH and LOW knobs to center, and all other knobs to minimum. CONFIGURING THE SPEAKERS • Connect one speaker to each speaker output jack, using the included speaker cables. • Stereo operation: ensure the Speaker Mode button is in the up state, and position the speakers standing vertically or on speaker poles to address your audience.
QUICK START GUIDE: M200-BT SETTING UP / HELPFUL TIPS • Make sure the Power Switch is off. • Turn HIGH and LOW knobs to center, and all other knobs to minimum. • Set all Graphic EQ sliders to center (0). CONFIGURING THE SPEAKERS • Connect one speaker to each speaker output jack, using the included speaker cables. • Stereo operation: ensure the Speaker Mode button is in the up state, and position the speakers standing vertically or on speaker poles to address your audience.
M100-BT: MIXER PANEL 15 10 1 7 11 2 8 3 9 4 12 13 6 5 16 M100-BT / M200-BT OWNER’S MANUAL 17 8 14
M100-BT: FEATURES AND FUNCTIONS 1 CHANNEL 1 AND 2 INPUT JACKS Connect XLR or 1/4-inch cables 13 MASTER LEVEL When Speaker Mode (11) button is pushed out, this knob sets the level for both speakers. When Speaker Mode (11) button is pushed in, this knob sets the level of Speaker 1 only.
M200-BT: MIXER PANEL 11 1 17 12 8 2 3 9 4 10 13 14 5 15 7 6 18 19 M100-BT / M200-BT OWNER’S MANUAL 10 16
M200-BT: FEATURES AND FUNCTIONS 1 CHANNEL 1, 2, 3, 4 INPUT JACKS Connect XLR or 1/4-inch cables 13 LEVEL/CLIP METER Upper meter shows level of speaker 1, lower meter shows level of speaker 2. When speakers are operating in stereo, upper meter shows left level and lower meter shows right level. When speakers are operating in Master + Monitor mode, upper meter shows Master level and lower meter shows Monitor level.
M100-BT/M200-BT SPECIFICATIONS HARBINGER MUV Series M100-BT M200-BT Power Output 800 Watts Peak 100+100 Watts RMS 800 Watts Peak 100+100 Watts RMS Mic/Guitar/Line Inputs (CH1 & CH2 on M100-BT) (CH3 & CH4 on M200-BT) XLR and 1/4-inch TRS balanced/unbalanced compatible audio input with Mic/Guitar/Line Switch, Echo knob, 2-Knob EQ, and Input Gain Control XLR and 1/4-inch TRS balanced/unbalanced compatible audio input with Mic/Guitar/Line Switch, Echo knob, 2-Knob EQ, and Input Gain Control XLR and 1/4-
