Installation Guide

10
Page 10 Page 11
11
ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS
13. Loosen two preinstalled screws from fan motor
assembly (H). Remove and save remaining
preinstalled screw.
16. Loosen two preassembled screws from tter plate (I).
Remove and save remaining preassembled screw.
14. Pull the BLUE and WHITE wires from fan motor
assembly (H) through center hole of tter plate (I).
Align two keyslots on tter plate (I) with two screws on
black bracket below fan motor assembly (H).
17. Connect BLUE wire from fan motor assembly (H) to
BLACK wire from light tter assembly (J). Connect
WHITE wire from fan motor assembly (H) to WHITE
wire from light tter assembly (J).
Screw
I
16
14
17
Black
Blue
H
J
White
H
B
EE
13
15. Place the tter plate (I) over two screws and turn
clockwise until it locks. Install previously removed
screw (Step 13, page 10) and securely tighten all
screws.
15
12. Insert blade assembly through slot on fan motor
assembly (H) and align three screw holes in blade
arm (F) with screw holes in fan motor assembly (H).
Secure with three blade arm screws (BB). Repeat for
remaining blade assemblies.
Hardware Used
Slot
F
BB
H
12
BB
Blade Arm Screw x 15 + 1 extra
Screw
H
Keyslots
Black
bracket
H
I
I
Screw