ITEM #0807431 BUILDER’S SERIES CEILING FAN MODEL #40680 Harbor Breeze® is a registered trademark of LF, LLC. All Rights Reserved. H ar ze Español p. 18 b o r Br e e ATTACH YOUR RECEIPT HERE Purchase Date _________________________ Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. - 5 p.m., EST, Friday.
TABLE OF CONTENTS Package Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Hardware Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Preparation . . . . . . . . . . . . . . . . .
PACKAGE CONTENTS B C A D E A G H D F I J E K PART A B C D E F G H I J K L M N O P C L G M N O DESCRIPTION Upper Mounting Bracket Lower Mounting Bracket (preassembled to Motor [C]) Motor Switch Housing (preassembled to Motor [C]) Light Kit (preassembled to the Switch Housing [D]) Motor Housing Blade Arm Blade Glass Globe Bulb Lower Bracket Screw (preassembled to Lower Mounting Bracket [B]) Thumbscrew (preassembled to Light Kit [E]) Motor Screw (preassembled to Motor [C]) Motor Housing Scre
HARDWARE CONTENTS (shown actual size) BB DD b o r Br e e ar H H ar ze CC ze AA b o r Br e e Blade Screw Blade Washer Pull Chain Extension Wire Connector Qty. 12 + 1 extra Qty. 12 + 1 extra Qty. 2 Qty.
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. • Before you begin installing the fan, disconnect the power by removing fuses or turning off the circuit breakers. • Make sure all electrical connections comply with local codes, ordinances, the National Electrical Code and ANSI/NFPA 70-199. Hire a qualified electrician or consult a do-it-yourself wiring handbook if you are unfamiliar with installing electrical wiring.
SAFETY INFORMATION CAUTION: Read all instructions and safety information before installing your new fan. Review the accompanying assembly diagrams. CAUTION: Be sure the outlet box is properly grounded or that a ground (green or bare) wire is present. CAUTION: Carefully check all screws, bolts and nuts on the fan motor assembly to ensure they are secured. CAUTION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
INITIAL INSTALLATION 1. Turn off the circuit breakers and the wall switch to the fan supply line leads. 1 DANGER: Failure to disconnect the power supply prior to installation may result in serious injury or death. 2. This fan is intended for Flushmount installations. Standard Mounting, Angled Mounting and Closemount installations are not available. 3. Ensure the blades (H) will be at least 30 in. from any obstructions and at least 7 ft. above the floor.
INITIAL INSTALLATION 4. Secure the upper mounting bracket (A) to the outlet box (not included) using screws and washers provided with the outlet box. 4 CAUTION: It is very important you use the proper hardware when installing the upper mounting bracket (A) as it will support the fan. A 5. Remove the preassembled lower bracket screw (K) from the lower mounting bracket (B) and the upper bracket screws (P) from the upper mounting bracket (A).
WIRING WARNING: To reduce the risk of fire, electrical shock or personal injury, wire connectors provided with this fan are designed to accept only one 12-gauge house wire and two lead wires from the fan. If your house wire is larger than 12 gauges and/or there is more than one house wire to connect to the two fan lead wires, consult an electrician for the proper size wire connectors to use. CAUTION: Be sure the outlet box is properly grounded or that a Ground (Green or Bare) wire is present. 1.
FINAL INSTALLATION 1. Temporarily lift the motor housing (F) to the upper mounting bracket (A) to determine which two motor housing screws (N) preassembled in the sides of the upper mounting bracket (A) align with the slotted holes in the top edge of the motor housing (F). Partially loosen the two motor housing screws (N) that align with the slotted holes. 1 A N Remove the other two motor housing screws (N) from the upper mounting bracket (A). F 2.
FINAL INSTALLATION 4. Remove the 10 preassembled motor screws (M) from the underside of the motor (C). Insert two motor screws (M) in each blade arm (G) and install the blade arm (G) to the underside of the motor (C) with motor screws (M). Tighten with Phillips screwdriver. 4 Repeat for each blade arm (G). C M 5. Install the bulb (J) into the socket of the light kit (E). Then, loosen the thumbscrews (L) on the light kit (E).
FINAL INSTALLATION 7. Turn on power supply to the fan. 7 Assembly is complete.
OPERATING INSTRUCTIONS 1. The fan pull chain has four positions to control fan speed. One pull is HIGH, two is MEDIUM, three is LOW and four turns the fan OFF. 1 Light Pull Chain 2. Use the fan reverse switch, located on the switch housing (D), to optimize your fan for seasonal performance. ar ze b o r Br e e H H ar ze The light pull chain has two positions to control the light, ON and OFF.
CARE AND MAINTENANCE At least twice each year, lower the motor housing and tighten all screws on the fan. Clean the motor housing with only a soft brush or lint-free cloth to avoid scratching the finish. Clean the blades with a lint-free cloth. You may occasionally apply a light coat of furniture polish to wood blades for added protection. Bulb Replacement: Use 60-watt max. E26-base LED, CFL or incandescent bulbs. Halogen bulbs are not recommended for this item.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE 1. The blades and/or blade are loose. 2. The blades are unbalanced. There is excessive wobbling. The fan operates correctly, but the lights are not working. 3. The fan mounting is not secure. CORRECTIVE ACTION 1. Check and tighten all screws that hold the fan blades to the blade arms and the blade arms to the motor. 2. Switch one blade with a blade from the opposite side. Or balance the fan using the blade balancing kit (O). 3. Turn off the power.
LIFETIME LIMITED WARRANTY The manufacturer warrants this fan to be free from defects in workmanship and materials present at time of shipment from the factory for a lifetime from the date of purchase by the original purchaser. The retailer also warrants that all other fan parts, excluding any glass or plastic blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of one year after the date of purchase by the original purchaser.
REPLACEMENT PARTS LIST For replacement parts, call the customer service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. - 5 p.m., EST, Friday.
