Installation Guide

FAN WIRING

WARNING:Toreducetheriskofre,electricalshockorpersonalinjury,wireconnectors

provided with this fan are designed to accept only one 12-gauge house wire and two lead wires from

the fan. If your house wire is larger than 12-gauge and there is more than one house wire to connect

to the two fan lead wires, consult an electrician for the proper size wire connectors to use.

CAUTION: Be sure the outlet box is properly grounded or that a ground (green or bare) wire is present.

1. Connect the remaining wires from the receiver (C), fan

and house supply according to the diagram and these

steps:

•Connectthegreenwirefromthefantothebare/

green (ground) house supply wire using a wire

connector from remote pack (O).

•Connectthewireharnessfromthereceiver(C)to

the wire harness from the fan.

Note: The green wire is the ground. If house wires

aredierentcolorsthanreferredtoabove,itis

recommended a professional electrician determines

the proper wiring.

2. Wrap electrical tape around each individual wire

connector from remote pack (O), down to the wire.

3. Turn the spliced/taped wires upward and gently push

the wires and wire connectors into the outlet box. Then

insert the connected wire harnesses in the space

between the upper mounting bracket and the lower

mounting bracket.

WARNING: Ensure no bare wire or wire strands are

visible after making connections. Place the green and

white wire connections on the opposite side of the

outlet box from the black.

Wire

Connector