Installation Guide

17
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
The fan is noisy.
1. The blades are loose.
2. There is a cracked blade.
3. The outlet box is not secure.
4. The mounting bracket is not
secure.
1. Check and tighten all screws that hold
the fan blades to the blade arms and the
motor.
2. Replace the cracked blade.
3. Ensure the outlet box is secured to the
building structure.
4. Ensure the mounting bracket is secured
to the outlet box and that the screws are
tight.
Remote doesn’t
work.
1. LED indicator does not
illuminate when remote button
is pushed.
2. The remote control is not
synced with the fan’s receiver.
1. Replace the transmitter battery with a new
12-volt battery.
2.
Turnothemainpower,thenturnitback
on. Within 30 seconds, press and hold the
high and low speed buttons on the remote
at the same time for 5 seconds. Once
complete, the fan will start on the low
speedwiththelight(ifapplicable)o.