Installation Guide

8
INITIAL INSTALLATION
4. Loosen all four preassembled mounting bracket
screws (R), then completely remove the two
mounting bracket screws (R) from the round holes
of canopy (E). Set aside for later use.
Detach mounting bracket (D) from canopy (E).
5. Attach mounting bracket (D) to outlet box (not
included) using screws and washers provided with
the outlet box.
CAUTION: It is very important you use the proper
hardware when installing the mounting bracket (D)
as this will support the fan.
6. Remove and discard the cardboard shipping material
from the motor assembly (H).
Cardboard
4
R
D
E
5
D
D
Standard or
Closemount
Angle
Mount
D
D
H
6