Installation Guide

2.
WIRING
13
Lowes.com/harborbreeze
Partially insert three blade screws (AA) along with
three fiber blade washers (BB) to attach one blade
arm (G) to a blade (F). Then, tighten each blade
screw (AA), starting with the one in the middle.
Repeat with remaining blades (F).
Blade Screw x 15
Fiber Blade Washer x 15
2
AA
BB
F
G
Hardware Used
AA
BB
IMPORTANT: Using a full range dimmer
switch (not included) to control fan speed will
cause a loud humming noise from fan. To
reduce the risk of fire or electrical shock, do
NOT use a full range dimmer switch to control
fan speed.
3.
1.
FINAL INSTALLATION
1
Dimmer
Switch
Speed
Switch
For illustrative purposes only--not
intended to cover all types of controls
3
1
2
3
B
D
L
D
B
Downrod
Option
Closemount
Option
Lift canopy (B) to mounting bracket (C) and
align slotted holes in canopy (B) with loosened
canopy mounting screws (L) in mounting
bracket (C). Twist canopy (B) to lock, then
insert the two canopy mounting screws (L) and
star washers (U) previously removed (Step 4a,
page 7). Tighten all canopy mounting screws
(L) securely.
U
L
U