Installation Guide

ASSEMBLY INSTRUCTIONS
ON
OFF
ON
OFF
Turn off circuit breakers and wall switch to
the fixture supply line leads.
DANGER: Failure to disconnect power
supply prior to installation may result in
serious injury or death.
1
1.
5
2a.
The total weight of the light kit is less than 8 lbs.
CAUTION: To reduce the risk of fire or electric shock, this light kit fitter (A) should only be used with
the compatible ceiling fan models (sold separately) listed below:
WCK52NWZ5D, WCK52NWZ5N, WCK52MWW5P, WCK52MWW5NB, WCK52ABZ5P,
WCK52ABZ5NB, WCK44NWZ5L1
Remove three switch housing screws and
lower switch housing from ceiling fan. [If fan
has a switch housing cap, proceed to 2b.]
If applicable, disconnect male plug from
motor housing and female plug from switch
housing. Remove switch housing from
switch housing plate.
Remove three switch housing screws at the
bottom of the switch housing and remove
the switch housing cap.
2a
2b
Switch Housing
Motor
Housing
Switch
Housing
Plate
Switch
Housing
Motor
Housing
Switch
Housing
Cap
2b.