Installation Guide

4.
6
ASSEMBLY INSTRUCTIONS
3.
Punch center cap out of switch housing
or switch housing cap with a screwdriver
(not included).
3
Switch
Housing
Switch
Housing
Cap
44a
Switch
Housing
Cap
Switch
Housing
4
Remove hex nut (B) and lock washer (C) from
threaded rod on light kit fitter (A). Gently feed
wires from light kit fitter (A) through hole in
middle of switch housing (see 4a) or switch
housing cap (see 4b) followed by lock washer
(C) and hex nut (B). Tighten hex nut (B) over
lock washer (C) for a secure fit.
B
C
A
A
B
C
OR
4b