Specifications Overall Dimensions 9-7/8" H x 13-3/4" L x 11" W Internal Dimensions 9-1/2" H x 13-1/2" L x 9-1/8" D Power Required “AA” Batteries x 4 Important Safety Information 1. Verify that installation surface has no hidden utility lines before drilling or driving screws. 2. Wear ANSI-approved safety goggles during installation. 3. Install only according to these instructions. Improper installation can create hazards. 4. Keep installation area clean and well lit. 5.
Installation 1. The safe has four concrete fasteners that are inside of the safe when you open it. There is also a mounting template included with the safe. Place the mounting template against the area you will be mounting the safe and tape it into place. 3. To use the concrete fasteners, drill a small pilot hole through the template to mark the hole placement. Next drill four holes in the correct location, using a concrete drill bit. Drill the holes the same diameter as the fasteners and 2" deep.
5. Using the Emergency Key: c. Turn Knob and pull Door open. a. Peel off the Label directly to the left of the keypad to reveal the Secret Key-Operated Lock. d. Replace the Keypad and the Label when finished. b. Insert Emergency Key into the Secret Key-Operated Lock and turn. IMPORTANT: NEVER LOCK THE EMERGENCY KEYS IN THE SAFE! Limited 90 Day Warranty Harbor Freight Tools Co.