Product manual

Page 8
For technical questions, please call 1-800-444-3353.
Item 97622
Specifications
Electrical Rating
120V~ / 8A
Chuck Capacity
1/2″ (13mm)
Gearbox Setting
Low
High
Motor No Load Speed
340 RPM
1375 RPM
Steel Capacity
1/2″
5/16″
Wood Auger Bit Capacity
1-1/2″
1-1/8″
Ship Auger Bit Capacity
1-1/2″
1-1/4″
Self-feed Bit Capacity
3-5/8″
1-3/8″
Setup - Before Use:
Read the
ENTIRE
IMPORTANT SAFETY INFORMATION
section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL
OPERATION:
Release the Trigger and unplug the tool from its electrical outlet before
assembling or making any adjustments to the tool.
Note:
For additional information regarding the parts listed in the following
For additional information regarding the parts listed in the following
pages, refer to
Parts
List and Diagram
on page
14.
Assembly
1.
The Side Handle (21) can be attached to either
side or to the top of the Drill by threading it into the
mounting holes in the Housing (50). (See Figure A)
2.
FIGURE A
SIDE HANDLE
(21)
HOUSING
(50)
The Top Handle (15) can be attached to the Drill
in three different positions (see Figure B).
3.
Place the Top Handle in one of the three positions,
and replace the Bolts. (See Figure B)
4.
FIGURE B
TOP
HANDLE
HANDLE
(15)
Ι
ΙΙ
ΙΙΙ
BOLT
(17)
(17)
To attach the Top Handle in position ΙΙ,
the Top Handle around must be turned 180°.
224184
SAFETY OPERATION MAINTENANCESETUP