Table of Contents SAFETY Specifications.............................................. 1 Safety.......................................................... 2 Installation................................................... 4 Operation..................................................... 5 Maintenance................................................ 6 Parts List and Assembly Diagram............... 6 Warranty......................................................
. Use on flat, level, hard surface capable of supporting load. 4. Wear ANSI-approved safety goggles during use. 5. Prevent trailer wheels from moving using wheel chocks while raising or lowering. 6. Before towing, fully raise trailer jack and secure properly in its horizontal position. 7. Keep out from under jack and tongue when applying and releasing load, or moving trailer. 8. Inspect before use. Do not use if parts are loose or damaged. 9.
Installation Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. SAFETY Note: For additional information regarding the parts listed in the following pages, refer to Parts List and Assembly Diagram on page 6. Components Rotating Plate INSTALLATION Wheel (One wheel for 1000 lb. Jack and two wheels for 1500 lb.
Operation Instructions Dismounting The Trailer from The Towing Vehicle 3. Assure that the spring loaded Swivel Handle pin locks the Jack into the lowered position. 6. You may need to extend the Jack further to clear the trailer hitch. When the vehicle is completely clear, and it is safe to do so, drive the vehicle away from the trailer. Caution: Have a spotter watch this operation to be sure the trailer is clear of the vehicle, and does not roll away. 4.
Inspection, Testing, and Maintenance Procedures not specifically explained in this manual must be performed only by a qualified technician. SAFETY TO PREVENT SERIOUS INJURY: Remove Jack from trailer before performing any inspection, maintenance, or cleaning procedures. TO PREVENT SERIOUS INJURY FROM TOOL FAILURE: Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use. Cleaning, Maintenance, and Lubrication INSTALLATION 1.
Parts List and Assembly Diagram - Item 67500 1500 lb.
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.