IMPORTANT SAFETY INFORMATION 1. SAVE THESE INSTRUCTIONS – This manual contains important safety and operating instructions for this battery charger. 2. Do not expose charger to rain or snow. 3. Use of an attachment not recommended or sold by the battery charger manufacturer may result in a risk of fire, electric shock, or injury to persons. 4. To reduce risk of damage to electric plug and cord, pull by plug rather than cord when disconnecting charger. 5. Do not use an extension cord with this item. 6.
Do not use battery charger for charging 14. FOLLOW THESE STEPS. A SPARK dry-cell batteries that are commonly NEAR BATTERY MAY CAUSE BATTERY used with home appliances. These EXPLOSION. TO REDUCE RISK batteries may burst and cause injury OF A SPARK NEAR BATTERY: to persons and damage to property. a. Position cables to reduce risk i. NEVER charge a frozen battery. of damage by hood, door, or moving engine part. 12. PREPARING TO CHARGE b.
17. Maintain labels and nameplates on the charger. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. 27. Do not leave charger or battery unchecked for extended periods of time to reduce risk. 18. This product is not a toy. Keep it out of reach of children. 29. This product is not a toy. Do not allow children to play with or near this item. 19.
Specifications Input Rated Output Maximum Output Battery Capacity Cable Length Fuse 120VAC, 60Hz, 0.25A 0.75 A /12 VDC 13.2 VDC 5 – 125 Ah 12 ft. 7.5A Blade-type 259927 Operation Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product. Note: This Float Charger is intended only to keep a fully charged battery from losing its charge.
Connection A SPARK NEAR BATTERY MAY CAUSE BATTERY EXPLOSION. TO REDUCE RISK OF A SPARK NEAR BATTERY follow these instructions exactly. TO PREVENT SERIOUS INJURY: Wear ANSI-approved splash-resistant safety goggles and heavy-duty rubber work gloves whenever connecting, disconnecting, or working near battery. Battery acid can cause permanent blindness. b. Connect NEGATIVE (BLACK) Clip Connector to NEGATIVE (NEG, N, –) post of battery. 1. Place Float Charger within 3 feet of battery.
Maintenance Instructions Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJURY: Unplug the charger, disconnect any battery, and allow charger to cool completely before performing any inspection, maintenance, or cleaning procedures. TO PREVENT SERIOUS INJURY FROM TOOL FAILURE: Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use. 1.
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
