Product manual

Page 3For technical questions, please call 1-800-444-3353.Item 69443
69444
Assembly Instructions
Note: Use a rubber mallet to ensure
snug connection of all nonmetal parts.
1. Place the bases of the four Posts (2,3)
into the corners of a Tray (1).
The flange on each Post will
only fit into certain corners.
2. Insert Carriage Bolts (10) down through
the holes in the bases of the Posts (2,3).
3. Attach Casters (6,7) to Carriage
Bolts (10) using Split Washers (11)
and Nuts (12). For best operation,
the two Straight Casters (6) go on
the same end of the cart, and the two
Swivel Casters (7) go on the other end.
4. Place the other Tray (1) upside
down on the work surface.
Turn the Handle (8) upside down
with the cup holder toward the Tray
and the hand holes on the outside.
5. Place the Tray with the Handle
firmly on top of the Posts (2,3).
Position the Handle above either
the swivel or fixed casters,
depending on operating preference.
6. Place a Post Cap (4,5) on top of
each corner of the Tray (1).
7. Use three Screws (9) through each Post
(2,3) from underneath to secure them.
Parts List and Diagram
Part Description Illustration Qty
1 Tray 2
2 RH Post 2
3 LH Post 2
4 RH Post Cap 2
5 LH Post Cap 2
6 Straight Caster 2
7 Swivel Caster 2
8 Handle 1
9 Screw 12
10 Carriage Bolt 16
11 Split Washer 16
12 Nut 16
1
4
5
2
3
8
9
10
11
12
6
7
REV 12c