Quick Start Guide

Good
Weld
Weld Speed
Too Fast
TO CORRECT:
weld
slower
Weld Speed
Too Slow
TO CORRECT:
weld
faster
Stickout
Too Long or
Wrong
Polarity
maintain
less
than
1
/
2
"
stickout
Check Polarity
and
TO CORRECT:
CLEAN FLUX-CORE WELDS FIRST!
Flux-core welds will have a coat of slag over them until cleaned.
68885 WELD EXAMPLE PICTURES
MIG 170
WIRE FEED WELDER
ITEM 68885
WIRE FEED SPEED
20A
240V~
Specications
Wire
.023″-.035″ (Tip and roller change required)
Capacity 22 Ga. – 1/4″ Steel Plate Material Types
Mild Steel and Stainless Steel (Not for welding Aluminum.)
I
O
Current
Too Low or
Wire Feed
Too Slow
TO CORRECT:
Increase
Current
Min1 -> Min2
Min2 -> Max1
Max1 -> Max2
or
MIG 170
WIRE FEED WELDER
ITEM 68885
WIRE FEED SPEED
20A
240V~
Specications
Wire
.023″-.035″ (Tip and roller change required)
Capacity 22 Ga. – 1/4″ Steel Plate Material Types
Mild Steel and Stainless Steel (Not for welding Aluminum.)
I
O
Current
Too High or
Wire Feed
Too Fast
TO CORRECT:
Decrease
Current
Max2 -> Max1
Max1 -> Min2
Min2 -> Min1
or