Table of Contents Safety Safetye��������������������������������������������������������� 2 Specifications.............................................. 6 Setup........................................................... 6 Operationa���������������������������������������������������� 7 Maintenancei����������������������������������������������� 8 Parts List and Diagram............................... 10 Warranty.....................................................
1. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with grounded power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. 4. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. 2.
Service Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Safety Specific Safety Rules 1. Avoid Serious Burns. The Soldering Gun reaches 1184° F. Do not point the Soldering Gun, or turn yourself toward another person while soldering. 7. This product is not a toy. Keep it out of reach of children. Setup 2. Do not open Soldering Gun. Do not attempt to open and repair this unit.
TO PREVENT ELECTRIC SHOCK AND DEATH FROM INCORRECT GROUNDING WIRE CONNECTION: Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. Never remove the grounding prong from the plug. Do not use the tool if the power cord or plug is damaged. If damaged, have it repaired by a service facility before use. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician.
Symbology n0 xxxx/min. No Load Revolutions per Minute (RPM) Double Insulated Safety WARNING marking concerning Risk of Eye Injury. Wear ANSI‑approved safety goggles with side shields. Canadian Standards Association Underwriters Laboratories, Inc. V ~ A Read the manual before set-up and/or use. Volts WARNING marking concerning Risk of Fire. Do not cover ventilation ducts. Keep flammable objects away. WARNING marking concerning Risk of Electric Shock. Properly connect power cord to appropriate outlet.
Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Safety Tool Set Up TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Make sure that the Trigger is in the off‑position and unplug the tool from its electrical outlet before performing any procedure in this section. Workpiece and Work Area Set Up 1. Designate a work area that is clean and well‑lit.
Maintenance and Servicing Procedures not specifically explained in this manual must be performed only by a qualified technician. Safety TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Make sure that the Trigger is in the off‑position, unplug the tool from its electrical outlet, and allow it to cool completely before performing any procedure in this section. TO PREVENT SERIOUS INJURY FROM TOOL FAILURE: Do not use damaged equipment.
Maintenance Operation Setup THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
Parts List and Diagram Parts List Safety Part 1 2 3 4 5 6 7 Description Soldering Tip Soldering Tip Nut Heat Insulator Transformer Assembly Right Housing Left Housing Light Bulb Lens Qty 3 2 1 1 1 1 1 Part 8 9 10 11 12 13 Description Light Bulb Light Bulb Socket Trigger Switch Power Cord Power Cord Sleeve Qty 1 1 1 1 1 1 Setup Operation Maintenance Record Product’s Serial Number Here: Note: If product has no serial number, record month and year of purchase instead.
Maintenance Operation Setup Safety Assembly Diagram Item 60765 For technical questions, please call 1-800-444-3353.
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.