Product manual

ManualsBrandsHarbor Freight Tools ManualsDo-It-Yourself tools2_in_1

ASSEMBLY AND OPERATION

Visit our website at: http://www.harborfreight.com

SAVE THESE INSTRUCTIONS. READ ALL PRECAUTIONS

AND INSTRUCTIONS.

2008 by Harbor Freight Tools

herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this document may not be drawn proportionally. Due to continuing improvements, actual product

may differ slightly from the product described herein. Tools required for assembly and service may not be included.

For technical questions or replacement parts, please call 1-800-444-3353.

SPECIFICATIONS

Product Applications

Designed for bending copper

and aluminum pipe.

Pipe Size Capacity 1/2” to 7/8” Diameter tubing.

Maximum Bend Up to 180°

Construction

Cast iron and steel tube.

Steel rollers. Aluminum hardware.

Accessories Bending dies (Qty. 2)

UNPACKING

When unpacking, check to make sure that

the item is intact and undamaged. If any parts are

missing or broken, please call Harbor Freight Tools

at the number shown on the cover of this document

as soon as possible.

IMPORTANT SAFETY

INFORMATION

Assembly Precautions

Assemble only according to these instruc-1.

tions. Improper assembly can create haz-

ards.

Wear ANSI-approved safety goggles and 2.

heavy-duty work gloves during assembly.

Keep assembly area clean and well lit.3.

Keep bystanders out of the area during as-4.

sembly.

Do not assemble when tired or when under 5.

the inuence of drugs or medication.

Use Precautions

This product is not a toy. Do not allow chil-1.

dren to play with or near this item.

Use for intended purpose(s) only.2.

Inspect before use; do not use if product is 3.

damaged.

Maintain product labels and nameplates. 4.

These carry important safety information.

If unreadable or missing, contact Harbor

Freight Tools for a replacement.

This tool is designed to bend soft metal pipe 5.

or tubing, such as copper or aluminum. Do

not attempt to bend hard metal pipe, such as

black iron pipe. You may damage the tool.

Do not attempt to bend brittle materials, such 6.

as glass or hard plastic. Those materials

2-IN-1

PIPE BENDER

94623

Revised Manual 10k

Summary of content (3 pages)

PAGE 1
2-IN-1 PIPE BENDER 94623 ASSEMBLY AND OPERATION Visit our website at: http://www.harborfreight.com Save these instructions. and instructions. Read all precautions Copyright© 2008 by Harbor Freight Tools®. All rights reserved. No portion of this document or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this document may not be drawn proportionally.
PAGE 2
7. may shatter and potentially cause injury. Always wear ANSI-approved safety impact eye goggles and heavy duty work gloves when using the Tube Bender. 3. Insert the tubing along the Handle (4). Move the Tube Holder (1) to allow the tube to slide under it, and position the Tube Holder (1) to hold the tube in place. (See Figure B.) As the pipe or tubing is being bent, there is a significant pinch hazard created.
PAGE 3
In fact, the manufacturer and/or distributor Record Serial Number Here: expressly states that all repairs and parts Note: If product has no serial number, record month and year of replacements should be undertaken by certified purchase instead. and licensed technicians, and not by the buyer. Note: No parts are available individually as replacement parts.