Table of Contents Safety Safety.......................................................... 3 Specifications.............................................. 4 Installation................................................... 5 Operation..................................................... 6 Inspection.................................................... 8 Parts List and Diagram............................... 10 Warranty.....................................................
IMPORTANT SAFETY INFORMATION Safety TO PREVENT SERIOUS INJURY AND DEATH: Basic Safety Information 2. Do not operate when load is not centered underneath. 3. Do not operate hoist with twisted, kinked, or damaged chain. Inspect chain carefully before every use. 4. Do not operate a damaged or malfunctioning hoist. Inspect hoist carefully and test operation before every use. 5. Do not lift people or lift loads over people. Falling loads can injure or kill people. 6.
Specifications Safety Rated Capacity 4,000 lb. Maximum Extension 10′ Suspension Hook Opening 1-1/8" Suspension Hook Depth 2" Load Hook Opening 1-1/8" Load Hook Depth 2" Installation Operation Inspection Page 4 For technical questions, please call 1-800-444-3353.
Installation Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Safety Note: For additional information regarding the parts listed in the following pages, refer to Parts List and Diagram on page 10. Installation 1. The Supporting Structure the Hoist is mounted to must be designed to withstand the loads and forces imposed by the Hoist for the rated load.
Operation Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Safety TO PREVENT SERIOUS INJURY: Operation of a vertical Hoist involves more than pulling the hand chain.
1. Do not wrap the hoist chain around the load. 2. Attach the load to the load hook securely by properly rated, suitable means, such as chains, shackles, hooks, lifting slings, etc. Load must be attached to prevent accidental disconnection. 3. Properly seat the sling or other device in the saddle of the Load Hook (shown in Figure D on the left). Do not allow the hook hitch to support any part of the Load. 4. Do not apply the load to the point of the hook (shown in Figure D on the right side diagram).
Inspection, Testing, and Maintenance Procedures not specifically explained in this manual must be performed only by a qualified technician. Safety TO PREVENT SERIOUS INJURY: Remove any load before performing any inspection, maintenance, or cleaning procedures. TO PREVENT SERIOUS INJURY FROM TOOL FAILURE: Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use.
Periodic (Thorough) Inspection 1. First, follow all Frequent Inspection procedures. Additionally: 2. Check fasteners for evidence of loosening. 3. Check load blocks, suspension housings, hand chain wheels, chain attachments, clevises, yokes, suspension bolts, shafts, gears, bearings, pins, rollers, and locking and clamping devices for evidence of wear, corrosion, cracks, and distortion. 4.
Parts List and Diagram PLEASE READ THE FOLLOWING CAREFULLY Safety THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
Safety Operation Installation Assembly Diagram 6 Inspection 5 Item 60719 For technical questions, please call 1-800-444-3353.
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
