Product manual

SKU 65330 For technical questions, please call 1-800-444-3353. Page 12
Part # Description Qty. Part # Description Qty.
1 Nut 16 14 Crushing Housing 1
2 Spring Washer 16 15 Working Bed 1
3 Flat Washer 16 16 Leg 2
4 Bolt 16 17 Bolt 4
5 Spring 2 18 Flat Washer 4
6 Screw Hook 2 19 Spring Washer 4
7 Frame 1 20 Nut 4
8 Flat Washer 2 21 Air/Hydraulic Jack 1
9 Press Head 1 22 Top Cross Beam 1
10 Nut 2 23 Clamp 1
11 Connecting Rod 1 24 Drain Hose 1
12 Upright 2 25 Set Screw 3
13 Filter Crushing Head 1 26 Press Plate 2
PARTS LIST
TROUBLESHOOTING
Problem Possible Causes Possible Solutions
Shop Press does
not work, or
does not operate
at its optimum
capability.
Pressure Release Valve open.1.
Air compressor’s Regulator 2.
not set at between 110 PSI
and maximum 120 PSI.
Loose and/or damaged Hose 3.
connections.
Hydraulic oil level low.4.
Trapped air in the system5.
Close Valve.1.
Set Regulator between 110 PSI and 120 2.
maximum PSI.
Inspect all Hose connections.3.
Rell (top off) Pump Assembly with Hydraulic 4.
oil.
Purge air (see Jack’s manual).5.
Damaged
workpiece.
Workpiece not evenly 1.
centered on Arbor Plates.
Workpiece not secured to 2.
Arbor Plates and Press Apron.
Place the workpiece evenly centered on the 1.
Arbor Plates.
Use clamps to secure workpiece.2.
Follow all safety precautions whenever diagnosing or servicing the
tool. Disconnect air supply before service.