Table of contents Safety ......................................................... 2 Maintenance .............................................. 10 Specifications ............................................. 5 Parts List and Diagram .............................. 11 Setup .......................................................... 6 Warranty .................................................... 12 SAFETy Operation ....................................................
1. Stay alert. Watch what you are doing and use common sense when operating the tool. Do not use the tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating the tool increases the risk of injury to persons. 2. Dress properly. Do not wear loose clothing or jewelry. contain long hair. Keep hair, clothing, and gloves away from moving parts.
Symbols and Specific Safety Instructions Symbol Definitions SAFETy Symbol pSI property or statement Pounds per square inch of pressure cFM Cubic Feet per Minute flow ScFM Cubic Feet per Minute flow at standard conditions NpT National pipe thread, tapered Symbol NpS property or statement National pipe thread, straight WARNING marking concerning Risk of Eye Injury. Wear ANSI-approved eye protection. WARNING marking concerning Risk of Explosion. Specific Safety Instructions SETUp 1.
Functional Description Capacity 20 Gallons Working Air Pressure 10 PSI Air Inlet 1/4 IN. - 18 NPT SAFETy Specifications components and controls Knob Gauge Safety Valve Regulator Knob Ball Valve SETUp Funnel Handle Air Inlet MAINTENANcE OpERATION Nozzle Item 61251 For technical questions, please call 1-800-444-3353.
Initial Tool Set Up/Assembly Read the ENTIRE IMpORTANT SAFETy y INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. SAFETy Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual. Note: This air tool may be shipped with a protective plug covering the air inlet. Remove this plug before set up. Assembly 1.
Item 61251 For technical questions, please call 1-800-444-3353.
A B C D E F G H I J K L M N O F Description F G I I J K N Slope J H Function H L L M O For noise and vibration reduction Secures air compressor in place Isolates sections of system for maintenance For vibration reduction Distributes air to branch lines To drain moisture from system Brings air to point of use Connects air to tool Prevents dirt and condensation from damaging tool or workpiece Adjusts air pressure to tool For air tool lubrication Provides quick connection and release Increase
Operating Instructions Read the ENTIRE IMpORTANT SAFETy y INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. SAFETy Inspect tool before use, looking for damaged, loose, and missing parts. If any problems are found, do not use tool until repaired. Workpiece and Work Area Set Up 1. Designate a work area that is clean and well-lit. The work area must not allow access by children or pets to prevent distraction and injury. 3.
User-Maintenance Instructions procedures not specifically explained in this manual must be performed only by a qualified technician. SAFETy TO pREVENT REVENT SERIOUS INJUR INJURy y FROM AccIDENTAL OpERATION: Turn off the tool, detach the air supply, safely discharge any residual air pressure in the tool, and release the throttle and/or turn the switch to its off position before performing any inspection, maintenance, or cleaning procedures.
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.