Product manual

Page 13For technical questions, please call 1-888-866-5797.ITEM 62323
SAFETYSETUPOPERATIONMAINTENANCE
Stopping the Engine
1. To stop the engine in an emergency,
turn the Engine Switch off.
2. Under normal conditions, use the following procedure:
a. Slide the Throttle or Speed Control
Lever to SLOW (the “turtle”).
b. Turn the Engine Switch off.
c. Close the Fuel Valve.
Cleaning and Storing
1. After every use and before storing, clean
debris out of machine:
a. Remove spark plug cap from spark plug.
b. Allow engine to cool completely.
c. Remove the Lock Nuts (34) and Washers (28)
holding the Hopper/Rotor Housing assembly in
place. Refer to Figure D.
d. Clear all debris out of the Main Housing
and discharge port.
e. Replace the Hopper/Rotor Housing assembly
and secure in place using the Washers and
Lock Nuts.
2. Store the Chipper/Shredder in a dry indoor
location that does not allow access by children.
NOTICE
See Long-Term Storage on page 17
for complete storage instructions.
O
I
OFF
Hopper
Rotor
Housing
Figure D: Fastener Locations