Product manual

SKU 66499 For technical questions, please call 1-800-444-3353. Page 5
2
3
8
3. Snap Handle Cross Bar (8) onto
smaller ends of Left (2) and Right (3)
Side Handles. Slide holes at other
end of Side Handles over hollow
posts on upper inner sides of Left and
Right Side Stands.
9
6
7
4. Snap the three Reel Cross Bars (9)
into slots on Side Reels (6) and (7).
There will be one remaining slot for
the Hose Connector (15) on the Left
Side Reel.
14
15
5. Place assembled Reel (6), (7) and (9)
between Side Stands so that the Left
Side Reel is on left side. Slide Crank
Handle (14) into Right Side Stand (5)
from the outside and into rectangular
hole in Right Side Reel, snapping the
part in place.
6.
Insert Hose Connector (15) through
center of Left Side Reel (7) and Left
Side Stand (4) from the inside, and
snap into remaining slot on inside of
Left Side Reel (7) as shown in photo .