Product manual
SKU 93458 For technical questions, please call 1-800-444-3353 PAGE 10
PARTS LIST
TROUBLESHOOTING
Problem Possible Cause Likely Solution
Jaws slipping. Worn or damaged Jaws. Replace Jaws.
Jaws will not open. 1. Loose Nosepiece.
2. Dirty Jaws.
1. Tighten Nosepiece.
2. Clean Jaws.
Stroke is too short. 1. Rivet pin not properly inserted into
Riveter.
2. Low oil.
3. Rivet wrong size.
1. Fully insert pin.
2. Prime Riveter.
3. Use proper rivet length.
Weak pulling action. 1. Low air pressure.
2. Broken/inadequate air
compressor.
3. Low oil.
1. Check regulator.
2. Have compressor serviced by a
qualied technician/upgrade to
compressor of sufcient capability.
3. Prime Riveter.
Leaking air. 1. Poor hose connections.
2. Damaged O-Ring.
3. Dirty Air Valve or airline inlet.
1. Reconnect using pipe thread seal tape.
2. Replace O-Ring.
3. Clean and lubricate with pneumatic tool
oil.
Part Description
1A Nosepiece (3/16”)
1B Nosepiece (5/32”)
1C Nosepiece (1/8”)
1D Nosepiece (3/32”)
6-1 Jaw Case Front (3/32”, 1/8”, 5/32”)
6-2 Jaw Case End
7 Jaw
8 Jaw Pusher
9 Case Washer Ring
10 Jaw Pusher Spring
10A Frame Cap O-Ring (27 x 2)
11 Frame Head
12 Case Lock Nut
13 Back Up Ring
14 Back Up O-Ring (p12)
15 Frame
16 Oil Piston
17 Oil Piston O-Ring (p22A)
18 Back Up Ring
19 Return Spring
20 Hanging Clip
21 Frame Cap
22 Frame Cap Nut
23 Safety Cap
24 Setting Screw Pin
25 Back Up O-Ring (12)
26 Back Up Ring
27 Frame Lock Nut
28 Rubber Cushion
Part Description
29 Air Cylinder
30-1 Air Piston Stem
30-2 Air Piston Insert
30-3 Air Piston Lock Nut
30-4 Large Iron Plate
30-5 Small Iron Plate
31A Air Piston Ring
32 Cylinder O-Ring (67.94 x 2.62)
33 Cylinder Cap
35 Spanner Gauge
36 Spanner
37 Trigger Pin
38 Connector
39 Trigger Rod
40 Trigger
41 Connector
42 Trigger Lever
43 Lever Pin
43A Valve Pusher O-Ring (p7)
44 Valve Pusher
44A Valve Spring
45 Valve
45A Valve Collar
45B Collar O-Ring (p5)
46 Valve Spring
51 Valve Cap O-Ring (p11)
52 Valve Cap
53 Quick Connector